MC9S08JM60CGT Freescale Semiconductor, MC9S08JM60CGT Datasheet - Page 23

• Manufacturer Part Number: MC9S08JM60CGT
• Description: IC MCU 8BIT 60K FLASH 48-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08JM60CGT

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SCI, SPI, USB
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN
• Processor Series: S08JM
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMOJM, DEMOJMSKT, DEMOFLEXISJMSD, DEMO9S08JM16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 12-bit
• Cpu Family: HCS08
• Device Core Size: 8b
• Frequency (max): 24MHz
• Total Internal Ram Size: 4KB
• # I/os (max): 37
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 48
• Package Type: QFN EP
• Package: 48QFN EP
• Family Name: HCS08
• Maximum Speed: 24 MHz
• Operating Supply Voltage: 3.3|5 V
• For Use With: DEMOJM - KIT DEMO FOR JM MCU FAMILYDEMOJMSKT - BOARD DEMO S08JM CARD W/SOCKET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Freescale Semiconductor
•
•
•
“Analog-to-Digital Converter
MCGERCLK with these modules.
MCGFFCLK — This clock source is divided by 2 to generate FFCLK after being synchronized to
the BUSCLK. It can be selected as clock source for the TPM modules. The frequency of the
MCGFFCLK is determined by the settings of the MCG. See the
Clock,” for details.
LPO clock— This clock is generated from an internal Low Power Oscillator that is completely
independent of the MCG module. The LPO clock can be selected as the clock source to the RTC
or COP modules. See
Operating Properly (COP)
TPMCLK — TPMCLK is the optional external clock source for the TPM modules. The TPMCLK
must be limited to 1/4th the frequency of the BUSCLK for synchronization. See
“Timer/Pulse-Width Modulator
Chapter 13, “Real-Time Counter
Watchdog,” for details on using the LPO clock with these modules.
MC9S08JM60 Series Data Sheet, Rev. 3
(S08ADC12V1),” for more information regarding the use of
(S08TPMV3),” for more details.
(S08RTCV1),” and
Section 12.4.7, “Fixed Frequency
Section 5.4, “Computer
Chapter 1 Device Overview
Chapter 16,
23