SAK-C161CS-LF CA Infineon Technologies, SAK-C161CS-LF CA Datasheet - Page 20

• Manufacturer Part Number: SAK-C161CS-LF CA
• Description: IC MCU 16BIT 256KB TQFP-128-2
• Manufacturer: Infineon Technologies
• Series: C16xxr

Specifications of SAK-C161CS-LF CA

• Core Processor: C166
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 93
• Program Memory Type: ROMless
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 128-LFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: K161CSLFCANP; K161CSLFCAXT; SAK-C161CS-LFCA; SAK-C161CS-LFCAINTR; SAK-C161CS-LFCATR; SAK-C161CS-LFCATR; SAKC161CSLFCAXT; SP000106869

C161CS/JC/JI-32R
C161CS/JC/JI-L
Memory Organization
The memory space of the C161CS/JC/JI is configured in a Von Neumann architecture
which means that code memory, data memory, registers and I/O ports are organized
within the same linear address space which includes 16 MBytes. The entire memory
space can be accessed bytewise or wordwise. Particular portions of the on-chip memory
have additionally been made directly bitaddressable.
The C161CS/JC/JI incorporates 256 KBytes of on-chip mask-programmable ROM for
code or constant data. The lower 32 KBytes of the on-chip ROM can be mapped either
to segment 0 or segment 1.
2 KBytes of on-chip Internal RAM (IRAM) are provided as a storage for user defined
variables, for the system stack, general purpose register banks and even for code. A
register bank can consist of up to 16 wordwide (R0 to R15) and/or bytewide (RL0, RH0,
…, RL7, RH7) so-called General Purpose Registers (GPRs).
1024 bytes (2
512 bytes) of the address space are reserved for the Special Function
Register areas (SFR space and ESFR space). SFRs are wordwide registers which are
used for controlling and monitoring functions of the different on-chip units. Unused SFR
addresses are reserved for future members of the C166 Family.
8 KBytes of on-chip Extension RAM (XRAM) are provided to store user data, user
stacks, or code. The XRAM is accessed like external memory and therefore cannot be
used for the system stack or for register banks and is not bitaddressable. The XRAM
permits 16-bit accesses with maximum speed.
In order to meet the needs of designs where more memory is required than is provided
on chip, up to 16 MBytes of external RAM and/or ROM can be connected to the
microcontroller.
Data Sheet
16
V3.0, 2001-01