AT91SAM9260B-QU Atmel, AT91SAM9260B-QU Datasheet - Page 762

• Manufacturer Part Number: AT91SAM9260B-QU
• Description: IC ARM9 MCU 208-PQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9260B-QU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Package: 208PQFP
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 180 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 96
• Interface Type: EBI/Ethernet/SPI/TWI/UART/USART/USB
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 6
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 180 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9260-EK
• Minimum Operating Temperature: - 40 C
• Cpu Family: AT91
• Device Core Size: 32b
• Frequency (max): 180MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 96
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• For Use With: AT91SAM9260-EK - KIT EVAL FOR AT91SAM9260AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

43.2.8
43.2.8.1
43.2.8.2
43.2.9
43.2.9.1
43.2.9.2
43.2.9.3
762
AT91SAM9260
Oscillators
SDRAM Controller
On-chip RC Startup Time
Bad Sampling of OSCSEL
SDCLK Clock Active After Reset
Mobile SDRAM Device Initialization Constraint
JEDEC Standard Compatibility
When booting from the on-chip RC, the startup time is fixed at 1200 ms and not 240 µs as spec-
ified in
None
When VDDBU only is powered, either internal RC oscillator or external 32K osc may start
regardless of the setting of the OSCSEL pin. The OSCSEL pin sampling is correct after applying
VDDCORE power supply and remains correct if VDDCORE is removed.
The first power-up sequence requires both VDDBU and VDDCORE to correctly sample the
OSCSEL signal.
After a reset, the SDRAM clock is always active leading to over consumption in the pad.
The following sequence stops the SDRAM clock.
Using Mobile SDRAM devices that need to have their DQMx level HIGH during Mobile SDRAM
device initialization may lead to data bus contention and thus external memories on the same
EBI must not be accessed.
This does not apply to Mobile SDRAM devices whose DQMx level is “Don’t care” during this
phase.
Mobile SDRAM initialization must be performed in internal SRAM.
In the current revision, SDCKE rises at the same time as SDCK while exiting self-refresh mode.
To be fully compliant with the JEDEC standard, SDCK must be STABLE before the rising edge
of SDCKE.
None.
1. Set the bit LPCB in the SDRAMC Low Power Register.
2. Write 0 in the SDRAMC Mode Register and perform a dummy write in SDRAM to
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
complete.
END
Table 6-1 on page
15.
6221I–ATARM–17-Jul-09