AT91SAM9260B-QU Atmel, AT91SAM9260B-QU Datasheet - Page 787

• Manufacturer Part Number: AT91SAM9260B-QU
• Description: IC ARM9 MCU 208-PQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9260B-QU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Package: 208PQFP
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 180 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 96
• Interface Type: EBI/Ethernet/SPI/TWI/UART/USART/USB
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 6
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 180 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9260-EK
• Minimum Operating Temperature: - 40 C
• Cpu Family: AT91
• Device Core Size: 32b
• Frequency (max): 180MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 96
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• For Use With: AT91SAM9260-EK - KIT EVAL FOR AT91SAM9260AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6221I–ATARM–17-Jul-09
Revision
6221C
Comments
Removed references to VDDOSC in
5.1 “Power Supplies” on page
and GNDPLLB with GNDPLL in
Table 4-2, “Pinout for 217-ball LFBGA Package,” on page
In
In
channels.
In
In
In
Boot Program: Corrected
Boot Program: Corrected
information on SAM-BA Boot principle in
WDT: Updated
EBI: Updated some pin names for NAND Flash in
Connections,” on page
PMC: Removed references to PLLRCB in
page 254
Electrical Characteristics: New values in
Electrical Characteristics: In
changed “activated” to “de-activated” in Idle line.
Electrical Characteristics: In
VDDOSC, changed value of VDDPLL to 3.3.
Electrical Characteristics: In
VDDANA and ADVREF.
Electrical Characteristics: New values for ISI timings in
Errata:
Added errata on Bus Matrix:
Section 44.2.5.1 ”Busy signal of R1b responses is not taken in account” on page 785
Section 44.2.13.3 ”RXBRK flag error in Asynchronous Mode” on page
Figure 2-1 on page
Figure 2-1 on page 3
Section 6.3 “Reset Pins” on page
Figure 8-2 on page
Section 10.4.3 “USART” on page
and in
Section 17.3 ”Functional Description” on page
Section 27.5.1 ”PLL Filter”, on page
3, corrected range for SCKx pins; label change on matrix block.
23, added UHPCK as USB Clock Controller output.
140.
and
Figure 13-7, ”Serial DataFlash Download” on page
Figure 13-1, ”Boot Program Algorithm Flow Diagram” on page
Section 7.3 “Peripheral DMA Controller” on page
Table 41-3, “Power Consumption for Different Modes(1),” on page
Table 41-9, “32 kHz Oscillator Characteristics,” on page
Section 41.9.5 ”ADC” on page
Section 44.2.3.1 ”Problem with locked transfers” on page
13. Corrected VDDPLLA and VDDPLLB with VDDPLL and GNDPLLA
Table 4-1, “Pinout for 208-pin PQFP Package,” on page 10
37, added information on modem signals.
14, added NRST as bidirectional.
“Features”
Table 41-1, “Absolute Maximum Ratings*,” on page
Section 13.6 ”SAM-BA Boot” on page
Figure 27-4, ”Divider and PLL Blocks Block Diagram” on
, in
Table 19-4, “EBI Pins and External Device
Table 3-1, “Signal Description
254.
Section 41.9.2 ”ISI” on page
12.
776, added decoupling information for
120.
789.
85.
17, removed TWI PDC
86.
List”, and in
773.
754, removed
and USART:
AT91SAM9260
784, MCI:
78. Updated
and in
749.
Section
751,
Change
Request
Ref.
3183
3235,
3071
3066
3236
3237
3245
3049
3075
3002
3317
3242
3056,
3062
3251
3057
3310
3146
3234
787