AT91SAM9260B-QU Atmel, AT91SAM9260B-QU Datasheet - Page 92

• Manufacturer Part Number: AT91SAM9260B-QU
• Description: IC ARM9 MCU 208-PQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9260B-QU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Package: 208PQFP
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 180 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 96
• Interface Type: EBI/Ethernet/SPI/TWI/UART/USART/USB
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 6
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 180 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9260-EK
• Minimum Operating Temperature: - 40 C
• Cpu Family: AT91
• Device Core Size: 32b
• Frequency (max): 180MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 96
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• For Use With: AT91SAM9260-EK - KIT EVAL FOR AT91SAM9260AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

13.8
6221I–ATARM–17-Jul-09
ROM Code Change Log
The SPI and NAND Flash drivers use several PIOs in alternate functions to communicate with
devices. Care must be taken when these PIOs are used by the application. The devices con-
nected could be unintentionally driven at boot time, and electrical conflicts between SPI output
pins and the connected devices may appear.
To assure correct functionality, it is recommended to plug in critical devices to other pins.
Table 13-11
are driven during the boot sequence for a period of less than 1 second if no correct boot program
is found.
For the DataFlash driven by the SPCK signal at 1 MHz, the time to download 4096 bytes is
reduced to 200 ms.
Before performing the jump to the application in internal SRAM, all the PIOs and peripherals
used in the boot program are set to their reset state.
Table 13-11. Pins Driven during Boot Program Execution
Here are the evolutions between ROM Code V1.4 and V1.7:
Note:
Peripheral
SPI0
SPI0
SPI0
SPI0
SPI0
PIOC
DBGU
DBGU
• The DataFlash and NAND Flash downloaded code size must be inferior to 4096 bytes.
• The code is always downloaded from the device address 0x0000_0000 to the address
• The downloaded code must be position-independent or linked at address 0x0000_0000.
• The DataFlash must be connected to NPCS0 and/or NPCS1 of the SPI.
• USB requirements:
• User Reset is no longer enabled
• NAND Flash Ready/Busy pin (PIOC 13) is no longer used
• There are no more Timeouts in the NAND Flash Boot sequence
0x0000_0000 of the internal SRAM (after remap).
– Crystal or Input Frequencies supported by Software Auto-detection. See
Table 13-2
To know which ROM Code version is in the chip, use the SAM-BA Monitor command “V#” (see
Table 13-8 on page 91
contains a list of pins that are driven during the boot program execution. These pins
and
Table 13-3 on page 81
)
Pin
MOSI
MISO
SPCK
NPCS0
NPCS1
NANDCS
DRXD
DTXD
for more information.
AT91SAM9260
PIO Line
PIOC11
PIOC14
PIOB14
PIOB15
PIOA1
PIOA0
PIOA2
PIOA3
Table
13-1,
92