ST72F63BH6T1 STMicroelectronics, ST72F63BH6T1 Datasheet - Page 53

• Manufacturer Part Number: ST72F63BH6T1
• Description: IC MCU 8BIT 32K FLASH 48-LQFP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F63BH6T1

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SCI, USB
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 12x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 48-LQFP
• Processor Series: ST72F6x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SCI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 1
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7MDTU3-EPB/US, ST72F63B-SK/RAIS, ST7MDTU3-EMU3, STX-RLINK
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 8 Channel / 8 bit, 12 Channel
• For Use With: 497-5521 - EVAL BOARD LOW SPEED USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

ST7263Bxx
10
Miscellaneous register
Miscellaneous register (MISCR)
Address: 0009h
Reset value: 0000 0000 (00h)
7
-
[7:3]
-
2
1
0
Reserved
SMS Slow mode Select.
This bit is set by software and only cleared by hardware after a reset. If this
bit is set, it enables the use of an internal divide-by-2 clock divider (refer to
Figure 18 on page
0: Divide-by-2 disabled and CPU clock frequency is standard
1: Divide-by-2 enabled and CPU clock frequency is halved.
USBOE USB enable.
If this bit is set, the port PC2 (PB1 on SO24) outputs the USB output enable
signal (at “1” when the ST7 USB is transmitting data).
Unused bits 7-4 are set.
MCO Main Clock Out selection
This bit enables the MCO alternate function on the PA0 I/O port. It is set and
cleared by software.
0: MCO alternate function disabled (I/O pin free for general-purpose I/O)
1: MCO alternate function enabled (f
-
Doc ID 7516 Rev 8
-
36). The SMS bit has no effect on the USB frequency.
Read/write
-
CPU
on I/O port)
SMS
Miscellaneous register
USBOE
MCO
0
53/186