HD64F3672FPIV Renesas Electronics America, HD64F3672FPIV Datasheet - Page 107

• Manufacturer Part Number: HD64F3672FPIV
• Description: MCU 3/5V 16K I-TEMP PB-FREE 64-L
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FPIV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7.2.1
FLMCR1 is a register that makes the flash memory change to program mode, program-verify
mode, erase mode, or erase-verify mode. For details on register setting, refer to section 7.4, Flash
Memory Programming/Erasing.
Bit
7
6
5
4
3
2
1
0
Bit Name Initial Value R/W
—
SWE
ESU
PSU
EV
PV
E
P
Flash Memory Control Register 1 (FLMCR1)
0
0
0
0
0
0
0
0
—
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Reserved
This bit is always read as 0.
Software Write Enable
When this bit is set to 1, flash memory
programming/erasing is enabled. When this bit is
cleared to 0, other FLMCR1 register bits and all EBR1
bits cannot be set.
Erase Setup
When this bit is set to 1, the flash memory changes to
the erase setup state. When it is cleared to 0, the erase
setup state is cancelled. Set this bit to 1 before setting
the E bit to 1 in FLMCR1.
Program Setup
When this bit is set to 1, the flash memory changes to
the program setup state. When it is cleared to 0, the
program setup state is cancelled. Set this bit to 1 before
setting the P bit in FLMCR1.
Erase-Verify
When this bit is set to 1, the flash memory changes to
erase-verify mode. When it is cleared to 0, erase-verify
mode is cancelled.
Program-Verify
When this bit is set to 1, the flash memory changes to
program-verify mode. When it is cleared to 0, program-
verify mode is cancelled.
Erase
When this bit is set to 1, and while the SWE = 1 and
ESU = 1 bits are 1, the flash memory changes to erase
mode. When it is cleared to 0, erase mode is cancelled.
Program
When this bit is set to 1, and while the SWE = 1 and
PSU = 1 bits are 1, the flash memory changes to
program mode. When it is cleared to 0, program mode is
cancelled.
Rev.4.00 Nov. 02, 2005 Page 81 of 304
REJ09B0143-0400
Section 7 ROM