MC56F8346VFVER2 Freescale Semiconductor, MC56F8346VFVER2 Datasheet - Page 42

• Manufacturer Part Number: MC56F8346VFVER2
• Description: IC HYBRID CTRLR 16BIT 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8346VFVER2

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 62
• Program Memory Size: 136KB (68K x 16)
• Program Memory Type: FLASH
• Ram Size: 6K x 16
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 144-LQFP
• For Use With: MC56F8367EVME - EVAL BOARD FOR MC56F83X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Note:
3.2.3
The recommended method of connecting an external clock is illustrated in
source is connected to XTAL and the EXTAL pin is grounded. Set OCCS_COHL bit high when using an
external clock source as well.
3.3 Registers
When referring to the register definitions for the OCCS in the 56F8300 Peripheral User Manual, use the
register definitions without the internal Relaxation Oscillator, since the 56F8346/56F8146 devices do
NOT contain this oscillator.
Part 4 Memory Map
4.1 Introduction
The 56F8346 and 56F8146 devices are 16-bit motor-control chips based on the 56800E core. These parts
use a Harvard-style architecture with two independent memory spaces for Data and Program. On-chip
RAM and Flash memories are used in both spaces.
42
2 Terminal
CL1
The OCCS_COHL bit must be set to 0 when a ceramic resonator is used. The reset condition on the
OCCS_COHL bit is 0. Please see the COHL bit in the Oscillator Control (OSCTL) register, discussed
in the 56F8300 Peripheral User Manual.
External Clock Source
EXTAL
R
z
XTAL
Figure 3-4 Connecting an External Clock Register
CL2
Figure 3-3 Connecting a Ceramic Resonator
Resonator Frequency = 4 - 8MHz (optimized for 8MHz)
External
XTAL
Clock
C1
3 Terminal
EXTAL
56F8346 Technical Data, Rev. 15
EXTAL
R
V
SS
z
XTAL
C2
Note: When using an external clocking source
with this configuration, the input “CLKMODE”
should be high and the COHL bit in the OSCTL
register should be set to 1.
Sample External Ceramic Resonator Parameters:
R
z
= 750 KΩ
CLKMODE = 0
Figure
3-4. The external clock
Freescale Semiconductor
Preliminary