DSPIC30F2010-30I/SO Microchip Technology, DSPIC30F2010-30I/SO Datasheet - Page 26

• Manufacturer Part Number: DSPIC30F2010-30I/SO
• Description: IC DSPIC MCU/DSP 12K 28SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2010-30I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 20
• Flash Memory Size: 12KB
• Supply Voltage Range: 2.5V To 5.5V
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 20
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification

8.5.3
The READP command instructs the programming
executive to read N 24-bit words of code memory
starting
Addr_MSB and Addr_LS. This command can only be
used to read 24-bit data. All data returned in response
to this command uses the packed data format
described in
Expected Response (2 + 3 * N/2 words for N even):
0x1200
2 + 3 * N/2
Least significant program memory word 1
...
Least significant data word N
Expected Response (4 + 3 * (N – 1)/2 words for N
odd):
0x1200
4 + 3 * (N – 1)/2
Least significant program memory word 1
...
MSB of program memory word N (zero padded)
DS70102K-page 26
15
Opcode
Length
N
Reserved
Addr_MSB
Addr_LS
Note:
Opcode
Field
Reserved
from
12 11
READP COMMAND
Reading unimplemented memory will
cause the programming executive to
reset.
Section 8.3 “Packed Data
0x2
0x4
Number of 24-bit instructions to read
(max of 32768)
0x0
MSB of 24-bit source address
LS 16 bits of 24-bit source address
the
24-bit address
Addr_LS
8 7
N
Description
Length
Addr_MSB
specified
Format”.
by
0
8.5.4
The PROGD command instructs the programming
executive to program one row of data EEPROM. The
data to be programmed is specified by the 16 data
words (D_1, D_2,..., D_16) and is programmed to the
destination address specified by Addr_MSB and
Addr_LSB. The destination address should be a
multiple of 0x20.
Once the row of data EEPROM has been programmed,
the programming executive verifies the programmed
data against the data in the command.
Expected Response (2 words):
0x1400
0x0002
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
D_1
D_2
...
D_16
Note:
Opcode
Field
Reserved
12 11
PROGD COMMAND
Refer to
information.
0x4
0x13
0x0
MSB of 24-bit destination address
LS 16 bits of 24-bit destination
address
16-bit data word 1
16-bit data word 2
16-bit data words 3 through 15
16-bit data word 16
Table 5-3
Addr_LS
© 2010 Microchip Technology Inc.
D_16
D_1
D_2
...
8 7
Description
for data EEPROM size
Length
Addr_MSB
0