PCF2127AT/1,518 NXP Semiconductors, PCF2127AT/1,518 Datasheet - Page 31
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
PCF2127AT/1,518
Manufacturer Part Number
PCF2127AT/1,518
Description
IC RTC/CALENDAR TCXO QTZ 20SOIC
Manufacturer
NXP Semiconductors
Type
Clock/Calendar/Alarmr
Datasheet
1.PCF2127AT1518.pdf
(80 pages)
Specifications of PCF2127AT/1,518
Package / Case
20-SOIC (0.300", 7.50mm Width)
Time Format
HH:MM:SS (12/24 hr)
Memory Size
512B
Date Format
YY-MM-DD-dd
Interface
I²C, 2-Wire Serial
Voltage - Supply
1.8 V ~ 4.2 V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Function
Serial Clock, Timestamp, Timekeeper, Watchdog, Alarm, Calendar, Timer, Timer Interrupt
Rtc Memory Size
512 bytes
Supply Voltage (max)
4.2 V
Supply Voltage (min)
1.8 V
Mounting Style
SMD/SMT
Rtc Bus Interface
I2C
Supply Current
2600 nA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
NXP Semiconductors
PCF2127A_2
Product data sheet
After this read/write access is completed, the time circuit is released again and any
pending request to increment the time counters that occurred during the read/write access
is serviced. A maximum of 1 request can be stored; therefore, all accesses must be
completed within 1 second (see
As a consequence of this method, it is very important to make a read or write access in
one go, that is, setting or reading seconds through to years should be made in one single
access. Failing to comply with this method could result in the time becoming corrupted.
As an example, if the time (seconds through to hours) is set in one access and then in a
second access the date is set, it is possible that the time may increment between the two
accesses. A similar problem exists when reading. A roll over may occur between reads
thus giving the minutes from one moment and the hours from the next. Therefore it is
advised to read all time and date registers in one access.
Fig 17. Data flow of the time function
Fig 18. Access time for read/write operations
START
All information provided in this document is subject to legal disclaimers.
SLAVE ADDRESS
12_24 hour mode
Rev. 02 — 7 May 2010
CALCULATION
LEAP YEAR
Figure
18).
DATA
SECONDS
MINUTES
MONTHS
1 Hz tick
HOURS
YEARS
DAYS
Integrated RTC, TCXO and quartz crystal
DATA
t < 1 s
WEEKDAY
001aaf901
PCF2127A
STOP
© NXP B.V. 2010. All rights reserved.
013aaa215
31 of 80