CV500ETN01 Omron, CV500ETN01 Datasheet - Page 194

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Number of Reception
Bytes (Command, Results
Storage Area)
Timeout Value (Command)
Source IP Address
(Results Storage Area)
Source UDP Port Number
(Results Storage Area)
Received Data (Results
Storage Area)
Precautions
Response Codes
Results Storage Area Response Codes
7-3-11 UDP SEND REQUEST
Command/Response Reference
The maximum number of bytes of data to be received is given in the com-
mand. The number of bytes of data received will be stored in the results stor-
age area. Up to 1,984 bytes can be specified.
The maximum control time between receiving the receive request and storing
the result. If this set time limit is exceeded, the code for a timeout error will be
set as the results storage response code. The value is set in units of 0.1 s.
The timeout time will be unlimited if the value is set to 0.
The IP address of the node sending data is stored in hexadecimal.
The port number of the node sending data.
The data sent from the remote node.
If a packet is received which contains more bytes than the number specified in
Number of reception bytes specified in the command, the specified number of
bytes will be stored and the remainder of the bytes will be discarded.
Requests that data be received by a UDP socket.
0000
0105
0302
1001
1002
1100
1101
1103
220F
2210
2211
0000
003E
0066
0080
0081
Response code
Response code
Normal
IP address setting error
CPU Unit error; execution not possible.
Command too large
Command too small
UDP socket number or number of reception bytes is out of
range.
The variable type for the results storage area is out of range.
Non-zero bit address specified for the results storage area.
The specified socket is currently receiving data.
The specified socket is not open.
High traffic at Unit; cannot execute service.
Normal
Internal buffer cannot be reserved due to high reception load
(ENOBUFS).
Internal memory cannot be allocated; cannot execute service.
A receive request timeout error occurred.
The specified socket was closed while receiving data.
Description
Description
Section 7-3
169