CV500ETN01 Omron, CV500ETN01 Datasheet - Page 79

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Converting from Previous Models
54
Note
If the format change is from ETN11 mode to ETN21 mode, then there will be
no effect on previous applications. If the change is from ETN21 mode to
ETN11 mode, however, then certain limitations will go into effect.
The following table shows the limitations that apply when operating in ETN11
mode.
Baud rate
FINS node address setting range
IP address conversion: Automatic
generation method
TCP keep-alive
FINS/TCP
TCP socket services
FTP server function
Mail send function
Mail receive function
Automatic clock adjustment function
DNS server host name
(1) These limitations do not apply when the CPU Bus Unit System Setup
(2) When I/O tables are created using one of the new Ethernet Unit models,
Area format is in ETN21 mode.
the CPU Bus Unit System Setup Area format is in ETN21 mode from the
beginning.
Item
• Automatic detection (100Base-TX or
• 1 to 254
• Dynamic only
• No time setting (Uses default setting)
• Server only for all connections (Uses default
• Socket option (keep-alive setting): Yes
• Number of Bytes Received at TCP Socket
• Data Received Flag: Yes
• Port No. setting: No (Uses default setting)
• The specifications for previous Units apply.
• The mail transmission status is as follows:
• Cannot be used
• Cannot be used
• Cannot be used
10Base-T)
setting)
Nos. 1 to 8: Yes
• Status of user mail transmission
• Status of periodic mail transmission
• Status of mail transmission when error
of transmission condition setting 5
tus of transmission condition setting 6
occurs
setting 7
Specifications in ETN11 mode
Status of transmission condition
Section 2-12
Status
Sta-