PAXTM000 Red Lion Controls, PAXTM000 Datasheet - Page 14

• Manufacturer Part Number: PAXTM000
• Description: Digital Multifunction Timer
• Manufacturer: Red Lion Controls
• Type: Timerr

Specifications of PAXTM000

• Time Range: 0.001sec To 1hr
• Power Consumption: 18VA
• Supply Voltage Ac, Min: 85V
• Signal Input Type: Pulse
• Supply Voltage Max: 250VAC
• Time Range Max: 999999h
• Character Size: 0.56"
• Accuracy: ±0.01% %
• Connection Type: Cage-Clamp
• Cut Out, Panel: 3.62×1.77 "
• Digit Height: 0.48
• Dimensions: 4.2"L×3.8"W×1.95"H
• Display Digit Height: 0.56 "
• Display Resolution: 0.001 Sec. (Minimum Digit), 1 hr. (Single Digit)
• Display Type: LED
• Function: Timer
• Humidity: 0 to 85% (Max.) RH
• Isolation Voltage: 2300 V (RMS)
• Length, Stripping: 0.3 in. Wire
• Memory Type: Non-Volatile EEPROM
• Number Of Digits: 5
• Power, Rating: 18 VA
• Primary Type: Electronic
• Range, Measurement: 0 to 999999
• Special Features: programmable
• Standards: cULus Listed, CSA Certified
• Temperature, Operating: 0 to +50 °C
• Termination: Cage Clamp
• Torque: 4.5 in.-lbs
• Voltage, Range: 85 to 250 VAC
• Voltage, Supply: 85 to 250 VAC
• Four Separate Displays: Timer, Counter, Real-Time Clock and Date
• Display Font Color: Red
• No. Of Digits / Alpha: 6
• Supply Voltage Ac, Max: 250V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

output state for all Setpoints entered as
Output Set and Reset User Inputs. Program only one user input for this function.
intensity level (of 4). The four levels correspond to Display Intensity Level
(
Input/Function Key, is not retained at power-down, unless Quick Programming
or Full Programming mode is entered and exited. The unit will power-up at the
last saved intensity level.
Communications Card is installed in the meter.
specific values transmitted during a print request are selected with the Print
Options parameter in Module 7. For User Inputs (level active), the meter
transmits blocks repeatedly as long as the input is active. For Function Keys,
(edge triggered) only one block is transmitted per key press.
through the serial port, and then performs a Momentary Reset on the displays
entered as
are selected with the Print Options parameter in Module 7. Only one transmit
and reset occurs per User Input activation or Function Key press.
installed in the meter.
When active (maintained action), the meter “holds” (maintains) the present
When activated (momentary action), the display intensity changes to the next
Note: The next two parameters only appear when an RS232 or RS485 Serial
When activated, the meter issues a block print through the serial port. The
When activated (momentary action), the meter first issues a block print
Note: The remaining parameters only appear when a Setpoint Card is
) settings of 0, 3, 8 & 15. The intensity level, when changed via the User
PRINT REQUEST and RESET (Edge Triggered)
CHANGE DISPLAY INTENSITY LEVEL
in the sublist. The specific values transmitted in the print block
t-dSp
C-dSP
SP-1
SP-2
SP-3
SP-4
DISPLAY
DISPLAY
OUTPUT HOLD (Level Active)
PRINT REQUEST
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Cycle Counter
DESCRIPTION
DESCRIPTION
Timer
in the sublist. Does not apply to
FACTORY
FACTORY
NO
NO
NO
NO
NO
NO
14
output for all Setpoints entered as
Setpoints entered as
output for all Setpoints entered as
Setpoints entered as
When activated (maintained action), the meter continually activates the
When activated (momentary action), the meter activates the output for all
When activated (maintained action), the meter continually deactivates the
When activated (momentary action), the meter deactivates the output for all
SP-1
SP-2
SP-3
SP-4
SP-1
SP-2
SP-3
SP-4
SP-1
SP-2
SP-3
SP-4
SP-1
SP-2
SP-3
SP-4
OUTPUT RESET (Edge Triggered)
DISPLAY
DISPLAY
DISPLAY
DISPLAY
OUTPUT SET (Edge Triggered)
OUTPUT RESET (Level Active)
OUTPUT SET (Level Active)
in the sublist.
in the sublist.
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
in the sublist.
in the sublist.
FACTORY
FACTORY
FACTORY
FACTORY
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO