CV500-ZS3AT1-EV2 Omron, CV500-ZS3AT1-EV2 Datasheet - Page 85

• Manufacturer Part Number: CV500-ZS3AT1-EV2
• Description: C.V SOFTWARE 3.5in DISK
• Manufacturer: Omron

Specifications of CV500-ZS3AT1-EV2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Output Unit Relays
4-3
4-4
72
Output Unit Fuses
Output Unit Relays
1, 2, 3...
1, 2, 3...
The following Output Units have one fuse each as shown in the table.
To replace a fuse in an Output Unit, perform the following steps.
To replace a Relay in an Output Unit, take the following steps.
C500-OD411
C500-OD217
C500-OA223
C500-OA121
C500-OA222
C500-OA226
C500-OD219
1. Turn off the power to the PC.
2. Detach the terminal block from the Output Unit by removing the screws lo-
3. Remove the screws that mount the Output Unit to the Backplane. Pulling the
4. There are eight screws on each side of the Output Unit. Remove these
5. Pull out the printed circuit board.
6. Insert a new fuse.
7. Reassemble the Unit.
1. Turn off the power to the PC.
cated at the top and bottom of the terminal block.
Unit toward you, remove the Output Unit from the Backplane.
screws to detach the case from the cover.
Output Unit
Mounting screws
Located at the top and bottom.
Terminal block mounting screws
Located at the top and bottom of
the terminal block.
Cover mounting screws (8)
250 V, 5 A
250 V, 5 A
250 V, 10 A
Fuse specifications
Section 4-4