CV500-ZS3AT1-EV2 Omron, CV500-ZS3AT1-EV2 Datasheet - Page 86

• Manufacturer Part Number: CV500-ZS3AT1-EV2
• Description: C.V SOFTWARE 3.5in DISK
• Manufacturer: Omron

Specifications of CV500-ZS3AT1-EV2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Output Unit Relays
3G2A5-OC221/223
Note To remove the relay, use the P6B-Y1 Relay Puller. Be sure to insert the relay in
the socket in the correct direction. The relay cannot be inserted in the wrong di-
rection and if excessive force is applied to the relay, the pins of the relay may
bend. The locations of relays on the PC boards are illustrated in the following
figures.
2. Detach the terminal block from the Output Unit, by removing the screws lo-
3. Remove the screws that mount the Output Unit to the Backplane. Pulling the
4. There are eight screws on each side of the Output Unit. Remove these
5. Pull out the printed circuit board.
6. Use the Relay Puller to pull out the Relay. Insert a new Relay.
7. Reassemble the Unit.
cated at the top and bottom of the terminal block.
Unit toward you, remove the Output Unit from the Backplane.
screws to detach the case from the cover.
0
15
10
12
13
14
1
11
2
3
4
5
6
7
8
9
Indicators
Mounting screws
Located at the top and bottom.
Terminal block mounting screws
Located at the top and bottom of the
terminal block.
Cover mounting screws (8)
Section 4-4
73