SK-86R01 Fujitsu, SK-86R01 Datasheet - Page 45

• Manufacturer Part Number: SK-86R01
• Description: KIT, STARTER, JADE, MB86R01
• Manufacturer: Fujitsu
• Type: Evaluation Boardr

Specifications of SK-86R01

• Kit Contents: A Base Board, A Graphics Subboard, A Video Extension Input Board, A Video Extension Output Board
• Mcu Supported Families: MB86R01
• Silicon Manufacturer: Fujitsu
• Core Architecture: ARM
• Core Sub-architecture: ARM926EJ-S
• Features: Built-in SRAM, Remap/Boot Control Function
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MB86R01 DATA SHEET
FUJITSU MICROELECTRONICS
PROPRIETARY AND CONFIDENTIAL
8.3.2.
DDRVDE (DRAM)
XTRST input is required only when MB86R01 is in DFT mode(JTAGSEL=”H”).
VDDI (internal)
VDDE (external)
CLK
XTRST
XSRST
XRST
Input XRST pin to Low when power-on.
Keep XRST pin High after setting to Low level for 2μs or more.
Access the other registers or memory controller after PLL Lockup Time.
When MB86R01 is in DFT mode, XTRST should be input as well as XRST.
output "L" when power-on
Input "L" when power-on
Input "L" when power-on
Input clock immediately
after power-on
Power On Reset
2 μs or more
Figure 8-3 Power On Sequence
Note: Clock is just an image, not the actual one.
For inputting the external signal to XSRST, input XSRST after changing XRST from "L" to "H".
PLL Lockup Time
39