AD9863BCPZ-50 Analog Devices Inc, AD9863BCPZ-50 Datasheet - Page 9

• Manufacturer Part Number: AD9863BCPZ-50
• Description: IC,RF Modulator/Demodulator,LLCC,64PIN,PLASTIC
• Manufacturer: Analog Devices Inc

Specifications of AD9863BCPZ-50

• Rf Type: WLL, WLAN
• Features: 12-bit ADC(s), 12-bit DAC(s)
• Package / Case: 64-LFCSP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Frequency: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Pin No.
52
54, 55
56
57, 58
60
62
63
64
1
2
3
Underlined pin names and descriptions apply when the device is configured without a serial port interface, referred to as No SPI mode.
Some pin descriptions depend on whether a serial port is used (SPI mode) or not (No SPI mode), indicated by the labels SPI and No SPI.
Some pin descriptions depend on the interface configuration: full-duplex (FD), half-duplex interleaved data (HD12), half-duplex parallel data (HD24), and a half-duplex
interface similar to the AD9860 and AD9862 data interface called clone mode (Clone). Clone mode requires a serial port interface.
Name
REFB
VIN+B, VIN−B
VREF
VIN−A, VIN+A
REFT
RxPWRDWN
TxPWRDWN
SPI_CS
1
Description
ADC Bottom Reference.
ADC B Differential Input.
ADC Band Gap Reference.
ADC A Differential Input.
ADC Top Reference.
Rx Analog Power-Down Control.
Tx Analog Power-Down Control.
SPI: Serial Port Chip Select. At power-up or reset, this must be high.
No SPI: Tie low to disable SPI and use mode pins. This pin must be tied low.
Rev. A | Page 9 of 40
2, 3
AD9863