CS1D-BC042D Omron, CS1D-BC042D Datasheet - Page 464

• Manufacturer Part Number: CS1D-BC042D
• Description: CS1D Dual CPU Exp
• Manufacturer: Omron

Specifications of CS1D-BC042D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Replacement Procedure for CPU Units with One Battery Connector
Replacement Procedure for CPU Units with Two Battery Connectors
Replacing User-serviceable Parts
1,2,3...
1,2,3...
Note There is a capacitor in the CPU Unit that will back up memory while the bat-
Note Complete the battery replacement procedure (at an ambient temperature of
Use the following procedure to replace a battery that has been completely dis-
charged.
1. Turn OFF the power to the CPU Unit. (If the power was already OFF, turn
tery is being replaced. If this capacitor is not completely charged by turning
ON the power supply for one minute, data will not be stable during battery
replacement.
2. Insert a small flat-blade screwdriver into the notch at the bottom of the bat-
3. Disconnect the connector under the cover of the CPU Unit, remove the old
25 C) within three minutes of turning OFF the power supply. If more than
three minutes elapse without a battery installed in the CPU Unit, data will not
be stable during battery replacement.
Use the following procedure to replace a battery that has been completely dis-
charged.
When replacing a battery with the power OFF, connect the new battery while
the old battery is in place. Remove the old battery after connecting the new
battery. (There are two pairs of identical connectors for the battery. The old
battery will not be charged even if the new battery is connected at the same
time.)
1. Turn OFF the power to the CPU Unit. (If the power was already OFF, turn
2. Insert a small flat-blade screwdriver into the notch at the bottom of the bat-
the power ON for at least one minute before turning the power OFF again.)
tery compartment cover and lift open the cover.
battery from the compartment, and replace the battery with a new one.
the power ON for at least ten seconds before turning the power OFF
again.)
tery compartment cover and lift open the cover.
Section 11-2
429