NUC130VE3CN Nuvoton Technology Corporation of America, NUC130VE3CN Datasheet - Page 360

• Manufacturer Part Number: NUC130VE3CN
• Description: IC MCU 32BIT 128KB FLASH 100LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro™ NUC100r

Specifications of NUC130VE3CN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

[1]
[0]
NuMicro™ NUC130/NUC140 Technical Reference Manual
THRE_IF
RDA_IF
(at least one of 3 bits, BIF, FEF and PEF, is set). If UA_IER [RLS_IEN] is enabled, the
RLS interrupt will be generated.
Note: When in RS-485 function mode, this field include “receiver detect any address
byte received address byte character (bit9 = ‘1’) bit".
Note: This bit is read only and reset to 0 when all bits of BIF, FEF and PEF are cleared.
Transmit Holding Register Empty Interrupt Flag (Read Only).
This bit is set when the last data of TX FIFO is transferred to Transmitter Shift Register.
If UA_IER [THRE_IEN] is enabled, the THRE interrupt will be generated.
Note: This bit is read only and it will be cleared when writing data into THR (TX FIFO
not empty).
Receive Data Available Interrupt Flag (Read Only).
When the number of bytes in the RX FIFO equals the RFITL then the RDA_IF will be
set. If UA_IER [RDA_IEN] is enabled, the RDA interrupt will be generated.
Note: This bit is read only and it will be cleared when the number of unread bytes of RX
FIFO drops below the threshold level (RFITL).
- 360 -
Publication Release Date: June 14, 2011
Revision V2.01