NUC130VE3CN Nuvoton Technology Corporation of America, NUC130VE3CN Datasheet - Page 369

• Manufacturer Part Number: NUC130VE3CN
• Description: IC MCU 32BIT 128KB FLASH 100LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro™ NUC100r

Specifications of NUC130VE3CN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.13 Controller Area Network (CAN)
5.13.1 Overview
5.13.2 Features
The C_CAN consists of the CAN Core, Message RAM, Message Handler, Control Registers and
Module Interface (Refer Figure 5-77). The CAN Core performs communication according to the
CAN protocol version 2.0 part A and B. The bit rate can be programmed to values up to 1MBit/s.
For the connection to the physical layer, additional transceiver hardware is required.
For communication on a CAN network, individual Message Objects are configured. The Message
Objects and Identifier Masks for acceptance filtering of received messages are stored in the
Message RAM. All functions concerning the handling of messages are implemented in the
Message Handler. These functions include acceptance filtering, the transfer of messages
between the CAN Core and the Message RAM, and the handling of transmission requests as well
as the generation of the module interrupt.
The register set of the C_CAN can be accessed directly by the software through the module
interface. These registers are used to control/configure the CAN Core and the Message Handler
and to access the Message RAM.
NuMicro™ NUC130/NUC140 Technical Reference Manual
Supports CAN protocol version 2.0 part A and B.
Bit rates up to 1 MBit/s.
32 Message Objects.
Each Message Object has its own identifier mask.
Programmable FIFO mode (concatenation of Message Objects).
Maskable interrupt.
Disabled Automatic Re-transmission mode for Time Triggered CAN applications.
Programmable loop-back mode for self-test operation.
16-bit module interfaces to the AMBA APB bus.
Support wake-up function
- 369 -
Publication Release Date: June 14, 2011
Revision V2.01