IDT82P2816BB IDT, Integrated Device Technology Inc, IDT82P2816BB Datasheet - Page 108

• Manufacturer Part Number: IDT82P2816BB
• Description: IC LIU T1/J1/E1 16+1CH 416-PBGA
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT82P2816BB

• Function: Line Interface Unit (LIU)
• Interface: E1, J1, T1
• Number Of Circuits: 1
• Voltage - Supply: 1.8V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: Defect and Alarm Detection, Driver Over-Current Detection and Protection, LLOS Detection, PRBSARB / IB Detection and Generation
• Number Of Transceivers: 1
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Supply: -
• Power (watts): -
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant
• Other names: 82P2816BB

INTS1 - Interrupt Status Register 1
Address: 021H, 061H, 0A1H, 0E1H, 121H, 161H, 1A1H, 1E1H, (CH1~CH8)
Type: Read / Write
Default Value: 00H
Programming Information
IDT82P2816
4 - 2
Bit
SAIS_IS
7
6
5
1
0
221H, 261H, 2A1H, 2E1H, 321H, 361H, 3A1H, 3E1H, (CH9~CH16)
7E1H (CH0)
7
SAIS_IS
LAIS_IS
IBA_IS
IBD_IS
Name
PA_IS
-
LAIS_IS
6
This bit indicates the interrupt status of the SAIS.
0: No SAIS interrupt is generated; or a ‘1’ is written to this bit. (default)
1: SAIS interrupt is generated and is reported by the INT pin. When the AIS_IES bit (b6, INTES,...) is ‘0’, a transition from ‘0’ to ‘1’
on the SAIS_S bit (b7, STAT1,...) set this bit to ‘1’; when the AIS_IES bit (b6, INTES,...) is ‘1’, any transition (from ‘0’ to ‘1’ or from
‘1’ to ‘0’) on the SAIS_S bit (b7, STAT1,...) set this bit to ‘1’.
This bit indicates the interrupt status of the LAIS.
0: No LAIS interrupt is generated; or a ‘1’ is written to this bit. (default)
1: LAIS interrupt is generated and is reported by the INT pin. When the AIS_IES bit (b6, INTES,...) is ‘0’, a transition from ‘0’ to ‘1’
on the LAIS_S bit (b6, STAT1,...) set this bit to ‘1’; when the AIS_IES bit (b6, INTES,...) is ‘1’, any transition (from ‘0’ to ‘1’ or from
‘1’ to ‘0’) on the LAIS_S bit (b6, STAT1,...) set this bit to ‘1’.
This bit indicates the interrupt status of the PRBS/ARB pattern synchronization.
0: No PRBS/ARB pattern synchronization interrupt is generated; or a ‘1’ is written to this bit. (default)
1: PRBS/ARB pattern synchronization interrupt is generated and is reported by the INT pin. When the PA_IES bit (b5, INTES,...)
is ‘0’, a transition from ‘0’ to ‘1’ on the PA_S bit (b5, STAT1,...) set this bit to ‘1’; when the PA_IES bit (b5, INTES,...) is ‘1’, any
transition (from ‘0’ to ‘1’ or from ‘1’ to ‘0’) on the PA_S bit (b5, STAT1,...) set this bit to ‘1’.
Reserved.
This bit indicates the interrupt status of the activate IB code.
0: No activate IB code interrupt is generated; or a ‘1’ is written to this bit. (default)
1: Activate IB code interrupt is generated and is reported by the INT pin. When the IB_IES bit (b0, INTES,...) is ‘0’, a transition
from ‘0’ to ‘1’ on the IBA_S bit (b1, STAT1,...) set this bit to ‘1’; when the IB_IES bit (b0, INTES,...) is ‘1’, any transition (from ‘0’ to
‘1’ or from ‘1’ to ‘0’) on the IBA_S bit (b1, STAT1,...) set this bit to ‘1’.
This bit indicates the interrupt status of the deactivate IB code.
0: No deactivate IB code interrupt is generated; or a ‘1’ is written to this bit. (default)
1: Deactivate IB code interrupt is generated and is reported by the INT pin. When the IB_IES bit (b0, INTES,...) is ‘0’, a transition
from ‘0’ to ‘1’ on the IBD_S bit (b0, STAT1,...) set this bit to ‘1’; when the IB_IES bit (b0, INTES,...) is ‘1’, any transition (from ‘0’ to
‘1’ or from ‘1’ to ‘0’) on the IBD_S bit (b0, STAT1,...) set this bit to ‘1’.
PA_IS
5
4
-
16(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
108
3
-
Description
2
-
IBA_IS
1
February 6, 2009
IBD_IS
0