SPC8106 S-MOS Systems, SPC8106 Datasheet - Page 291

• Manufacturer Part Number: SPC8106
• Description: LCD/CRT VGA CONTROLLER
• Manufacturer: S-MOS Systems

SPC8106
SETFONT.EXE Display Utility
1.5
Program Messages
ERROR: VGA required.
A VGA display must be present to run SETFONT.
ERROR: VGA must be the active display.
The active display must be the VGA to run SETFONT. If the active display is currently a monochrome adapter,
run the DOS command mode co80 to switch to the VGA device, and re-run SETFONT.
ERROR: As a device driver SETFONT cannot run a child program.
To load a child program run SETFONT from the DOS prompt.
ERROR: SETFONT not installed.
SETFONT failed to load as a device driver. For some reason DOS has failed to load the device driver. Check the
CONFIG.SYS file for errors.
ERROR: Not enough memory to load SETFONT.
The amount of free system memory below 640 Kilobytes is not enough to run SETFONT. SETFONT requires 8
Kilobytes of system memory. Free up more system memory and run SETFONT again.
ERROR: Cannot execute command line.
SETFONT could not load the specified child program. This may be due to one of many factors. Ensure that the
command line is correct and that the child program can be loaded in a command shell.
ERROR: Cannot operate in a command shell.
SETFONT cannot install as a TSR when it is run within another program or within an environment like Windows.
ERROR: SETFONT is already installed as a device driver
and cannot be installed again.
SETFONT cannot be installed more than once in the CONFIG.SYS file. Remove the redundant line from
CONFIG.SYS.
ERROR: SPC8109 /SPC8108 /SPC8106 /SPC8110 /SPC8104 required.
This version of SETFONT requires an SPC8104, SPC8106, SPC8108, SPC8109 or SPC8110 VGA Controller.
ERROR: Seiko Epson Video BIOS Extension required.
SETFONT requires the Seiko Epson Video BIOS and its Extensions. If your system uses another manufacturer’s
BIOS this program will not run.
411-1.0
UY1-5
S-MOS Systems, Inc. • Tel: [phone] • Fax: [phone] • http://www.smos.com