zl50019gag2 Zarlink Semiconductor, zl50019gag2 Datasheet - Page 43

no-image

zl50019gag2

Manufacturer Part Number
zl50019gag2
Description
Enhanced 2 K Digital Switch With Stratum 4e Dpll
Manufacturer
Zarlink Semiconductor
Datasheet
13.3
The DPLL generates a limited number of output signals. All signals are synchronous to each other and in the
normal operating mode, are locked to the selected input reference. The DPLL provides outputs with the following
frequencies:
13.4
The widest tolerance required for any of the given input clock frequencies is ±130 ppm for the T1 clock
(1.544 MHz). If the system clock (crystal/oscillator) accuracy is ±30 ppm, it requires a minimum pull-in range of
±160 ppm. Users who do not require the ±30 ppm freerun accuracy of the DPLL can use a ±100 ppm system clock.
Therefore the pull-in range is a minimal ±230 ppm. The pull-in range of this device is ±260 ppm.
14.0
14.1
The ZL50019 has an exceptional cycle to cycle timing variation tolerance of 20 ns. This allows the ZL50019
to synchronize off a low cost DPLL when it is in either Divided Slave mode or Multiplied Slave mode.
14.2
The input jitter acceptance is specified in standards as the minimum amount of jitter of a certain frequency on the
input clock that the DPLL must accept without making cycle slips or losing lock. The lower the jitter frequency, the
larger the jitter acceptance. For jitter frequencies below a tenth of the cut-off frequency of the DPLL's jitter transfer
function, any input jitter will be followed by the DPLL. The maximum value of jitter tolerance for the DPLL is
±1023UI
14.3
The corner frequency (-3 dB) of the Stratum 4E DPLL is 15.2 Hz.
Output Frequencies
Pull-In/Hold-In Range (also called Locking Range)
Input Clock Cycle to Cycle Timing Variation Tolerance
Input Jitter Acceptance
Jitter Transfer Function
p-p
Jitter Performance
.
CKo0
CKo1
CKo2
CKo3
CKo4
CKo5
FPo0
FPo1
FPo2
FPo3
FPo5
Table 10 - Generated Output Frequencies
4.096 MHz
8.192 MHz
16.384 MHz
4.096 MHz, 8.192 MHz, 16.384 MHz or 32.768 MHz
1.544 MHz or 2.048 MHz
19.44 MHz
8 kHz (244 ns wide pulse)
8 kHz (122 ns wide pulse)
8 kHz (61 ns wide pulse)
8 kHz (244 ns, 122 ns, 61 ns or 30 ns wide pulse)
8 kHz (51 ns wide pulse)
Zarlink Semiconductor Inc.
ZL50019
43
Data Sheet

Related parts for zl50019gag2