hd66100 Renesas Electronics Corporation., hd66100 Datasheet - Page 36

• Manufacturer Part Number: hd66100
• Description: H8/3867 Series
• Manufacturer: Renesas Electronics Corporation.

4. Register Indirect with Post-Increment or Pre-Decrement—@Rn+ or @–Rn:
5. Absolute Address—@aa:8 or @aa:16: The instruction specifies the absolute address of the
6. Immediate—#xx:8 or #xx:16: The instruction contains an 8-bit operand (#xx:8) in its second
7. Program-Counter Relative—@(d:8, PC): This mode is used in the Bcc and BSR
8. Memory Indirect—@@aa:8: This mode can be used by the JMP and JSR instructions. The
If an odd address is specified as a branch destination or as the operand address of a MOV.W
instruction, the least significant bit is regarded as 0, causing word access to be performed at the
address preceding the specified address. See 2.3.2, Memory Data Formats, for further information.
operand in memory.
The absolute address may be 8 bits long (@aa:8) or 16 bits long (@aa:16). The MOV.B and bit
manipulation instructions can use 8-bit absolute addresses. The MOV.B, MOV.W, JMP, and
JSR instructions can use 16-bit absolute addresses.
For an 8-bit absolute address, the upper 8 bits are assumed to be 1 (H'FF). The address range is
H'FF00 to H'FFFF (65280 to 65535).
byte, or a 16-bit operand (#xx:16) in its third and fourth bytes. Only MOV.W instructions can
contain 16-bit immediate values.
The ADDS and SUBS instructions implicitly contain the value 1 or 2 as immediate data. Some
bit manipulation instructions contain 3-bit immediate data in the second or fourth byte of the
instruction, specifying a bit number.
instructions. An 8-bit displacement in byte 2 of the instruction code is sign-extended to 16 bits
and added to the program counter contents to generate a branch destination address. The
possible branching range is –126 to +128 bytes (–63 to +64 words) from the current address.
The displacement should be an even number.
second byte of the instruction code specifies an 8-bit absolute address. The word located at this
address contains the branch destination address.
The upper 8 bits of the absolute address are assumed to be 0 (H'00), so the address range is
from H'0000 to H'00FF (0 to 255). Note that with the H8/300L Series, the lower end of the
address area is also used as a vector area. See 3.3, Interrupts, for details on the vector area.
Register indirect with post-increment—@Rn+
Register indirect with pre-decrement—@–Rn
The @Rn+ mode is used with MOV instructions that load registers from memory.
The register field of the instruction specifies a 16-bit general register containing the address
of the operand. After the operand is accessed, the register is incremented by 1 for MOV.B
or 2 for MOV.W. For MOV.W, the original contents of the 16-bit general register must be
even.
The @–Rn mode is used with MOV instructions that store register contents to memory.
The register field of the instruction specifies a 16-bit general register which is decremented
by 1 or 2 to obtain the address of the operand in memory. The register retains the
decremented value. The size of the decrement is 1 for MOV.B or 2 for MOV.W. For
MOV.W, the original contents of the register must be even.
21