PIC18F1220 MICROCHIP [Microchip Technology], PIC18F1220 Datasheet - Page 188

• Manufacturer Part Number: PIC18F1220
• Description: 18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F1220/1320
19.5.1
The program memory may be read to, or written from,
any location using the table read and table write
instructions. The device ID may be read with table
reads. The configuration registers may be read and
written with the table read and table write instructions.
In normal execution mode, the CPn bits have no direct
effect. CPn bits inhibit external reads and writes. A
block of user memory may be protected from table
writes if the WRTn configuration bit is ‘0’. The EBTRn
bits control table reads. For a block of user memory
with the EBTRn bit set to ‘0’, a table read instruction
that executes from within that block is allowed to read.
A table read instruction that executes from a location
outside of that block is not allowed to read and will
result in reading ‘0’s. Figures 19-6 through 19-8
illustrate table write and table read protection.
FIGURE 19-6:
DS39605C-page 186
TBLPTR = 0002FFh
Results: All table writes disabled to Blockn whenever WRTn = 0
Register Values
PROGRAM MEMORY
CODE PROTECTION
PC = 0007FEh
PC = 0017FEh
TABLE WRITE (WRTn) DISALLOWED: PIC18F1320
Program Memory
TBLWT *
TBLWT *
Note:
000000h
0001FFh
000200h
000FFFh
001000h
001FFFh
.
Code protection bits may only be written to
a ‘0’ from a ‘1’ state. It is not possible to
write a ‘1’ to a bit in the ‘0’ state. Code pro-
tection bits are only set to ‘1’ by a full Chip
Erase or Block Erase function. The full
Chip Erase and Block Erase functions can
only be initiated via ICSP or an external
programmer.
Configuration Bit Settings
WRTB, EBTRB = 11
WRT0, EBTR0 = 01
WRT1, EBTR1 = 11
 2004 Microchip Technology Inc.