PIC18F1220 MICROCHIP [Microchip Technology], PIC18F1220 Datasheet - Page 48

• Manufacturer Part Number: PIC18F1220
• Description: 18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F1220/1320
5.7
The program memory is addressed in bytes. Instruc-
tions are stored as two bytes or four bytes in program
memory. The Least Significant Byte of an instruction
word is always stored in a program memory location
with an even address (LSB = 0). Figure 5-5 shows an
example of how instruction words are stored in the pro-
gram memory. To maintain alignment with instruction
boundaries, the PC increments in steps of 2 and the
LSB will always read ‘0’ (see Section 5.4 “PCL,
PCLATH and PCLATU”).
FIGURE 5-5:
5.7.1
PIC18F1220/1320
instructions: MOVFF, CALL, GOTO and LFSR. The second
word of these instructions has the 4 MSBs set to ‘1’s and
is decoded as a NOP instruction. The lower 12 bits of the
second word contain data to be used by the instruction.
If the first word of the instruction is executed, the data in
the second word is accessed. If the second word of the
EXAMPLE 5-3:
DS39605C-page 46
CASE 1:
Object Code
CASE 2:
Object Code
0110 0110 0000 0000
1100 0001 0010 0011
1111 0100 0101 0110
0010 0100 0000 0000
0110 0110 0000 0000
1100 0001 0010 0011
1111 0100 0101 0110
0010 0100 0000 0000
Instructions in Program Memory
TWO-WORD INSTRUCTIONS
Instruction 1:
Instruction 2:
Instruction 3:
devices
INSTRUCTIONS IN PROGRAM MEMORY
TWO-WORD INSTRUCTIONS
Program Memory
Byte Locations
MOVLW
GOTO
MOVFF
Source Code
TSTFSZ
MOVFF
Source Code
TSTFSZ
ADDWF
ADDWF
MOVFF
have
four
055h
000006h
123h, 456h
REG1
REG1, REG2 ; No, skip this word
REG3
REG1
REG1, REG2 ; Yes, execute this word
REG3
two-word
LSB = 1
; is RAM location 0?
; Execute this word as a NOP
; continue code
; is RAM location 0?
; 2nd word of instruction
; continue code
EFh
C1h
0Fh
F0h
F4h
The CALL and GOTO instructions have the absolute
program memory address embedded into the instruc-
tion. Since instructions are always stored on word
boundaries, the data contained in the instruction is a
word address. The word address is written to
PC<20:1>, which accesses the desired byte address in
program memory. Instruction #2 in Figure 5-5 shows
how the instruction ‘GOTO 000006h’ is encoded in the
program memory. Program branch instructions, which
encode a relative address offset, operate in the same
manner. The offset value stored in a branch instruction
represents the number of single-word instructions that
the PC will be offset by. Section 20.0 “Instruction Set
Summary” provides further details of the instruction
set.
instruction is executed by itself (first word was skipped),
it will execute as a NOP. This action is necessary when
the two-word instruction is preceded by a conditional
instruction that results in a skip operation. A program
example that demonstrates this concept is shown in
Example 5-3. Refer to Section 20.0 “Instruction Set
Summary” for further details of the instruction set.
LSB = 0
55h
03h
00h
23h
56h
Word Address
00000Ah
00000Ch
00000Eh
000000h
000002h
000004h
000006h
000008h
000010h
000012h
000014h
 2004 Microchip Technology Inc.