PEB20534H-10 SIEMENS [Siemens Semiconductor Group], PEB20534H-10 Datasheet - Page 373

• Manufacturer Part Number: PEB20534H-10
• Description: DMA Supported Serial Communication Controller with 4 Channels DSCC4
• Manufacturer: SIEMENS [Siemens Semiconductor Group]

Semiconductor Group
GPIM(15:0)
GPP Interrupt Mask Control
Each bit of this bit field enables/disables interrupt generation in case of
transitions on the corresponding GPP pins. Even if not configured for
GPP operation (bit field ’PERCFG’ in register GMODE), this register
should be programmed appropriately for correct SSC or LBI operation
(masking interrupt generation).
Interrupt generation should be disabled for GPP pins, configured as
output pins via bit field ’GPDIR’ in register GPDIR.
GPIM(i)=’0’
GPIM(i)=’1’
Pin GPi interrupt generation is disabled.
Pin GPi interrupt generation is enabled.
373
Detailed Register Description
Data Sheet 09.98
PEB 20534
(-)