AN983 ETC [List of Unclassifed Manufacturers], AN983 Datasheet - Page 27

• Manufacturer Part Number: AN983
• Description: PCI/miniPCI-to-Ethernet LAN Controller
• Manufacturer: ETC [List of Unclassifed Manufacturers]

R/W*: Read and Write clear
12~9
8
7~2
1,0
Rev. 1.8
DSEL
PME_En
---
PWRS
interpreting the value of the Data register. This field is
required for any function that implements the Data register.
Otherwise, it’s optional.
The AN983B doesn’t support Data register and Data_Scale.
Data_Select, This four-bit field is used to select which data
is to be reported through the Data register and Data_Scale
field. This field is required for any function that implements
the Data register.
The AN983B doesn’t support Data_select.
PME_En, “1” enables the AN983B to assert PME#. When “0”
disables the PME# assertion.
Magic packet default enable:
When Csr18<18> and csr18<19> are set to 1, than the magic
packet wake up event will be default enabled (csr13<9> be
set) it doesn’t matter the PME_En is set or not.
Reserved.
PowerState, This two-bit field is used both to determine the
current power state of the AN983B and to set the AN983B
into a new power state. The definition of this field is given
below.
00b - D0
01b - D1
10b - D2
11b - D3hot
This field is auto cleared to D0 when power resumed.
AN983B
www.admtek.com.tw
ADMtek Inc.
PCI/miPCI Fast Ethernet Controller with integrated PHY
0000b
0
000000b
00b
R/W
R/W
RO
R/W
27