DM9008AEP_06 DAVICOM [Davicom Semiconductor, Inc.], DM9008AEP_06 Datasheet - Page 31
![no-image](/images/no-image-200.jpg)
DM9008AEP_06
Manufacturer Part Number
DM9008AEP_06
Description
Ethernet Controller with General Processor Interface
Manufacturer
DAVICOM [Davicom Semiconductor, Inc.]
Datasheet
1.DM9008AEP_06.pdf
(50 pages)
8.5 Auto-negotiation Advertisement Register (ANAR) - 04
This register contains the advertised abilities of this DM9008A device as they will be transmitted to its
link partner during Auto-negotiation.
Preliminary
Version: DM9008AEP-DS-P03
Dec. 14, 2006
4.12-4.1
4.4-4.0
4.15
4.14
4.13
4.10
Bit
4.9
4.8
4.7
4.6
4.5
1
Bit Name
TX_HDX
TX_FDX
Reserved
10_HDX
10_FDX
Selector
ACK
FCS
NP
RF
T4
<00001>,
Default
0, RO/P
0,RO/P
X, RW
1, RW
0, RW
0, RW
1, RW
1, RW
1, RW
0,RO
RW
Next page Indication
0 = No next page available
1 = Next page available
The DM9008A has no next page, so this bit is permanently
set to 0
Acknowledge
1 = Link partner ability data reception acknowledged
0 = Not acknowledged
The DM9008A's auto-negotiation state machine will
automatically control this bit in the outgoing FLP bursts and
set it at the appropriate time during the auto-negotiation
process. Software should not attempt to write to this bit.
Remote Fault
1 = Local device senses a fault condition
0 = No fault detected
Reserved
Write as 0, ignore on read
Flow Control Support
1 = Controller chip supports flow control ability
0 = Controller chip doesn’t support flow control ability
100BASE-T4 Support
100BASE-T4 is not supported by DM9008A.
100BASE-TX Full Duplex Support
100BASE-TX full duplex is not supported by DM9008A.
100BASE-TX Support
100BASE-TX half duplex is not supported by DM9008A.
10BASE-T Full Duplex Support
1 = 10BASE-T full duplex is supported by the local device
0 = 10BASE-T full duplex is not supported
10BASE-T Support
1 = 10BASE-T half duplex is supported by the local device
0 = 10BASE-T half duplex is not supported
Protocol Selection Bits
These bits contain the binary encoded protocol selector
supported by this node
<00001> indicates that this device supports IEEE 802.3
CSMA/CD
Ethernet Controller with General Processor Interface
Description
DM9008AEP
31