LPC1111FHN33/102'5 NXP Semiconductors, LPC1111FHN33/102'5 Datasheet - Page 318

• Manufacturer Part Number: LPC1111FHN33/102'5
• Description: ARM Microcontrollers - MCU CORTEX-M0 8 KB FL 4 KB SRAM
• Manufacturer: NXP Semiconductors

Specifications of LPC1111FHN33/102'5

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC1111
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 65 C to + 150 C
• Mounting Style: SMD/SMT
• Interface Type: I2C, SPI, UART
• Number Of Programmable I/os: 42
• Number Of Timers: 4
• Program Memory Type: Flash
• Factory Pack Quantity: 4000

NXP Semiconductors
UM10398
User manual
17.4.10 CAN message received callback
17.4.9 CAN/CANopen callback functions
Example call:
// Call CANopen handler
(*rom)->pCAND->canopen_handler();
The CAN API supports callback functions for various events. The callback functions are
published via an API function.
typedef struct _CAN_CALLBACKS {
} CAN_CALLBACKS;
Example callback table definition:
// List of callback function pointers
const CAN_CALLBACKS callbacks = {
};
Example call:
// Publish callbacks
(*rom)->pCAND->config_calb((CAN_CALLBACKS *)&callbacks);
The CAN message received callback function is called on the interrupt level by the CAN
interrupt handler.
Example call:
void (*CAN_rx)(uint8_t msg_obj);
void (*CAN_tx)(uint8_t msg_obj);
void (*CAN_error)(uint32_t error_info);
uint32_t (*CANOPEN_sdo_read)(uint16_t index, uint8_t subindex);
uint32_t (*CANOPEN_sdo_write)(
uint32_t (*CANOPEN_sdo_seg_read)(
uint32_t (*CANOPEN_sdo_seg_write)(
uint8_t (*CANOPEN_sdo_req)(
CAN_rx,
CAN_tx,
CAN_error,
CANOPEN_sdo_exp_read,
CANOPEN_sdo_exp_write,
CANOPEN_sdo_seg_read,
CANOPEN_sdo_seg_write,
CANOPEN_sdo_req,
uint16_t index, uint8_t subindex, uint8_t *dat_ptr);
uint16_t index, uint8_t subindex, uint8_t openclose,
uint8_t *length, uint8_t *data, uint8_t *last);
uint16_t index, uint8_t subindex, uint8_t openclose,
uint8_t length, uint8_t *data, uint8_t *fast_resp);
uint8_t length_req, uint8_t *req_ptr, uint8_t *length_resp,
uint8_t *resp_ptr);
All information provided in this document is subject to legal disclaimers.
Rev. 12 — 24 September 2012
Chapter 17: LPC11Cxx C_CAN on-chip drivers
UM10398
© NXP B.V. 2012. All rights reserved.
318 of 538