MCIMX508CZK8B Freescale Semiconductor, MCIMX508CZK8B Datasheet - Page 114

• Manufacturer Part Number: MCIMX508CZK8B
• Description: Processors - Application Specialized CODEX REV 1.1
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX508CZK8B

• Core: ARM Cortex A8
• Processor Series: i.MX50

Package Information and Contact Assignments
114
NVCC_RESET
NVCC_SD1
NVCC_SD2
NVCC_SPI
NVCC_SRTC
NVCC_SSI
NVCC_UART
POP_EMMC_RST
POP_LPDDR2_1.8V
POP_LPDDR2_ZQ0
POP_LPDDR2_ZQ1
POP_NAND_VCC
USB_VDDA25
USB_VDDA33
VCC
VDD_DCDCI
VDD_DCDCO
VDD1P2
VDD1P8
Table 81. 416 PoPBGA 13 x 13 mm Ground, Power, Sense, and Reference Contact Signals (continued)
V8
T7
U8
R7
AA1
R8
T8
A19
A20, B19, B20, M5, N5
AA24
AA23
D19, D20
AC9, AD9
AC11, AD11
H14, H15, H16, H17, J17, K14, K15, K17, L15
Y6
Y5
AD6
AD7
i.MX50 Applications Processors for Consumer Products, Rev. 4
—
—
—
—
—
—
—
This is PoP eMMC 4.4 NAND Reset
input pin. This pin does not connect to
the i.MX50. If using eMMC 4.4 NAND,
this pin can be connected to a GPIO.
For non 4.4 eMMC applications, leave
floating.
This is the 1.8V supply for the PoP
LPDDR2. These pins do not connect to
the i.MX50.
This is the PoP LPDDR2 ZQ0 pin. This
pin does not connect to the i.MX50.
This should be connected on the PCB
to a 240 Ω 1% resistor to ground
This is the PoP LPDDR2 ZQ1 pin. This
pin does not connect to the i.MX50. If
used, this should be connected on the
PCB to a 240 Ω 1% resistor to ground
for the PoP eMMC NAND. Note that
because the eMMC memory and I/O
domains are shorted together, it is not
possible to support 1.8 V I/O for the PoP
eMMC NAND.
USB_OTG_VDDA25 and
USB_H1_VDDA25 are shorted
together.
Note that on the PoPBGA package,
USB_OTG_VDDA33 and
USB_H1_VDDA33 are shorted
together.
—
—
—
—
—
This is the 3.3V I/O and memory supply
Note that on the PoPBGA package,
Freescale Semiconductor