W25X40BVZPIG Winbond Electronics, W25X40BVZPIG Datasheet - Page 16

• Manufacturer Part Number: W25X40BVZPIG
• Description: IC SPI FLASH 4MBIT 8WSON
• Manufacturer: Winbond Electronics

Specifications of W25X40BVZPIG

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 4M (512K x 8)
• Speed: 104MHz
• Interface: SPI Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-WSON
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.2.3
The Write Enable instruction (Figure 4) sets the Write Enable Latch (WEL) bit in the Status Register to
a 1. The WEL bit must be set prior to every Page Program, Sector Erase, Block Erase, Chip Erase
and Write Status Register instruction. The Write Enable instruction is entered by driving /CS low,
shifting the instruction code “06h” into the Data Input (DI) pin on the rising edge of CLK, and then
driving /CS high.
9.2.4
The Write Disable instruction (Figure 5) resets the Write Enable Latch (WEL) bit in the Status Register
to a 0. The Write Disable instruction is entered by driving /CS low, shifting the instruction code “04h”
into the DIO pin and then driving /CS high. Note that the WEL bit is automatically reset after Power-up
and upon completion of the Write Status Register, Page Program, Sector Erase, Block Erase and
Chip Erase instructions.
Write Enable (06h)
Write Disable (04h)
Figure 5. Write Disable Instruction Sequence Diagram
Figure 4. Write Enable Instruction Sequence Diagram
- 16 -
W25X10BV/20BV/40BV