BTS117 Infineon Technologies, BTS117 Datasheet - Page 10

• Manufacturer Part Number: BTS117
• Description: IC LOW SIDE SW PWR 3.5A TO-220-3
• Manufacturer: Infineon Technologies
• Series: HITFET®r
• Type: Low Sider

Specifications of BTS117

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 80 mOhm
• Current - Output / Channel: 3.5A
• Current - Peak Output: 25A
• Voltage - Supply: 2.2 V ~ 10 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Through Hole
• Package / Case: TO-220-2
• Module Configuration: Low Side
• Peak Output Current: 3.5A
• Output Resistance: 0.08ohm
• Input Delay: 40µs
• Output Delay: 70µs
• Supply Voltage Range: 1.3V To 10V
• Driver Case Style: TO-220
• No. Of Pins: 3
• Packages: P-TO220-3
• Channels: 1.0
• Vds (max): 60.0 V
• Id(nom): 3.5 A
• Rds (on) (max): 100.0 mOhm
• Id(lim) (min): 7.0 A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS117IN; BTS117NK; SP000011195

Edition 7.97
Published by Siemens AG,
Bereich Halbleiter Vetrieb,
Werbung, Balanstraße 73,
81541 München
© Siemens AG 1997
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components,
not for applications, processes and circuits implemented within components or assemblies.
The information describes a type of component and shall not be considered as warranted characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany
or the Siemens Companies and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types
in question please contact your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales
office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to
invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components
systems
1)A critical component is a component used in a life-support device or system whose failure can reasonably be
2)Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
Semiconductor Group
expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of
that device or system.
maintain and sustain and/or protecf human life. If they fail, it is reasonable to assume that the health of the
user or other persons may be endangered.
2
with the express written approval of the Semiconductor Group of Siemens AG.
1
of the Semiconductor Group of Siemens AG, may only be used in life-support devices or
Page 10
13.07.1998
BTS 117