TLE7209-2R Infineon Technologies, TLE7209-2R Datasheet - Page 32

• Manufacturer Part Number: TLE7209-2R
• Description: IC H-BRIDGE 7A DC MOTOR PDSO-20
• Manufacturer: Infineon Technologies
• Type: Half Bridge DC Motor Driverr

Specifications of TLE7209-2R

• Applications: DC Motor Controller, Stepper Motor Controller
• Number Of Outputs: 1
• Current - Output: 5A
• Voltage - Supply: 5 V ~ 28 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: DSO-20
• Operating Supply Voltage: 5 V to 28 V
• Supply Current: 30 mA
• Mounting Style: SMD/SMT
• Packages: PG-DSO-20
• Current Limit (min.): 5.5 A
• Rthjc (max): 1.5 K/W
• Quiescent Current (max.): 20mA
• Operating Range: 5 - 28 V
• Rds (on) (typ./switch): 150.0 mOhm
• For Use With: DEMOBOARDTLE7209-2RIN - BOARD DEMO FOR TLE 7209-2R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Load: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000014748; SP000294312; TLE72092RNT; TLE72092RT; TLE72092RXT

Edition 2005-jan-11
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
©
Infineon Technologies AG 2005.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.