MCIMX35WPDKJ Freescale Semiconductor, MCIMX35WPDKJ Datasheet - Page 9

• Manufacturer Part Number: MCIMX35WPDKJ
• Description: BOARD DEV FOR I.MX35
• Manufacturer: Freescale Semiconductor
• Series: i.MX35r
• Type: MPUr

Specifications of MCIMX35WPDKJ

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: i.MX35
• Processor Series: i.MX35
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, JTAG
• Core: ARM11
• For Use With/related Products: i.MX35
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Freescale Semiconductor
Mnemonic
eSDHCv2
GPIO(3)
GPU2D
Block
ESAI
GPT
FEC
(3)
General
purpose timers
processing unit
2Dv1
Enhanced
serial audio
interface
Enhanced
secure digital
host controller
Ethernet
General
purpose I/O
modules
Graphics
Block Name
i.MX35 Applications Processors for Industrial and Consumer Products, Rev. 9
SDMA
ARM
SDMA
ARM
ARM
ARM
Domain
Table 4. Digital and Analog Modules (continued)
1
Connectivity
peripherals
Connectivity
peripherals
Connectivity
peripherals
Pins
Timer
peripherals
Multimedia
peripherals
Subsystem
The enhanced serial audio interface (ESAI) provides a full-duplex
serial port for serial communication with a variety of serial devices,
including industry-standard codecs, SPDIF transceivers, and other
DSPs. The ESAI consists of independent transmitter and receiver
sections, each section with its own clock generator.
The eSDHCv2 consists of four main modules: CE-ATA, MMC, SD
and SDIO. CE-ATA is a hard drive interface that is optimized for
embedded applications of storage. The MultiMediaCard (MMC) is a
universal, low-cost, data storage and communication media to
applications such as electronic toys, organizers, PDAs, and smart
phones. The secure digital (SD) card is an evolution of MMC and is
specifically designed to meet the security, capacity, performance,
and environment requirements inherent in emerging audio and
video consumer electronic devices. SD cards are categorized into
Memory and I/O. A memory card enables a copyright protection
mechanism that complies with the SDMI security standard. SDIO
cards provide high-speed data I/O (such as wireless LAN via SDIO
interface) with low power consumption.
Note: CE-ATA is not available for the MCIMX351.
The Ethernet media access controller (MAC) is designed to support
both 10 and 100 Mbps Ethernet/IEEE 802.3 networks. An external
transceiver interface and transceiver function are required to
complete the interface to the media
Used for general purpose input/output to external ICs. Each GPIO
module supports 32 bits of I/O.
Each GPT is a 32-bit free-running or set-and-forget mode timer with
a programmable prescaler and compare and capture registers. A
timer counter value can be captured using an external event and can
be configured to trigger a capture event on either the leading or
trailing edges of an input pulse. When the timer is configured to
operate in set-and-forget mode, it is capable of providing precise
interrupts at regular intervals with minimal processor intervention.
The counter has output compare logic to provide the status and
interrupt at comparison. This timer can be configured to run either
on an external clock or on an internal clock.
This module accelerates OpenVG and GDI graphics.
Note: Not available for the MCIMX351.
Brief Description
9