HW-SPAR3E-SK-US-G Xilinx Inc, HW-SPAR3E-SK-US-G Datasheet - Page 115

• Manufacturer Part Number: HW-SPAR3E-SK-US-G
• Description: KIT STARTER SPARTAN-3E
• Manufacturer: Xilinx Inc

Specifications of HW-SPAR3E-SK-US-G

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 122-1507

Expansion Connectors
Hirose 100-pin FX2 Edge Connector (J3)
Spartan-3E FPGA Starter Kit Board User Guide
UG230 (v1.2) January 20, 2011
R
The Spartan
easy interface flexibility to other off-board components. The board includes the following
I/O expansion headers (see
•
•
•
A 100-pin edge connector is located along the right edge of the board (see
connector is a Hirose FX2-100P-1.27DS header with 1.27 mm pitch. Throughout the
documentation, this connector is called the FX2 connector.
As shown in
these pins are true, bidirectional I/O pins capable of driving or receiving signals. Five pins,
FX2_IP<38:35> and FX2_IP<40> are Input-only pins on the FPGA. These pins are
highlighted in light green in
signals.
Default is 3.3V, set to 2.5V for differential I/O
Jumper JP9, I/O Bank 0 Voltage
Connectorless logic analyzer probes
A Hirose 100-pin edge connector with 43 associated FPGA user-I/O pins, including
up to 15 differential LVDS I/O pairs and two Input-only pairs
Three 6-pin Peripheral Module connections
Landing pads for an Agilent or Tektronix connectorless probe
J6 Probe Landing Pads
®
Figure
-3E FPGA Starter Kit board provides a variety of expansion connectors for
15-2, 43 FPGA I/O pins interface to the FX2 connector. All but five of
www.xilinx.com
Figure 15-1: Expansion Headers
Figure
Table 15-1
15-1):
J4 6-pin Accessory Header
and cannot drive the FX2 connector but can receive
Hirose 100-pin FX2 Connector, J3
43 I/O connections, high-performance
J1 6-pin Accessory Header
J2 6-pin Accessory Header
Chapter 15
Figure
UG230_c12_01_030606
15-1). This
115