PIC18LF6310-I/PT Microchip Technology, PIC18LF6310-I/PT Datasheet - Page 296

• Manufacturer Part Number: PIC18LF6310-I/PT
• Description: IC PIC MCU FLASH 4KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF6310-I/PT

• Core Size: 8-Bit
• Program Memory Size: 8KB (4K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 54
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm: RoHS Compliant
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

designated as ID locations, where the user can store
locations are readable and writable. The ID locations
PIC18F6310/6410/8310/8410
24.6
Eight
checksum or other code identification numbers. These
locations are readable during normal execution through
the TBLRD instruction. During program/verify, these
can be read when the device is code-protected.
24.7
PIC18F6310/6410/8310/8410 microcontrollers can be
serially programmed while in the end application circuit.
This is simply done with two lines for clock and data,
and three other lines for power, ground and the
programming voltage. This allows customers to manu-
facture boards with unprogrammed devices and then
program the microcontroller just before shipping the
product. This also allows the most recent firmware or a
custom firmware to be programmed.
DS39635C-page 296
memory
ID Locations
In-Circuit Serial Programming
locations
(200000h-200007h)
are
24.8
When the DEBUG Configuration bit is programmed to
a ‘0’, the In-Circuit Debugger functionality is enabled.
This function allows simple debugging functions when
used with MPLAB
this feature enabled, some resources are not available
for general use.
required by the background debugger.
TABLE 24-4:
To use the In-Circuit Debugger function of the micro-
controller, the design must implement In-Circuit Serial
Programming connections to MCLR/V
RB7 and RB6. This will interface to the In-Circuit
Debugger module available from Microchip or one of
the third party development tool companies.
I/O Pins:
Stack:
Program Memory:
Data Memory:
In-Circuit Debugger
Table 24-4
®
DEBUGGER RESOURCES
IDE. When the microcontroller has
 2010 Microchip Technology Inc.
shows which resources are
RB6, RB7
2 levels
<1 Kbyte
<16 bytes
PP
, V
DD
, V
SS
,