PIC18LF6310-I/PT Microchip Technology, PIC18LF6310-I/PT Datasheet - Page 9

• Manufacturer Part Number: PIC18LF6310-I/PT
• Description: IC PIC MCU FLASH 4KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF6310-I/PT

• Core Size: 8-Bit
• Program Memory Size: 8KB (4K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 54
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm: RoHS Compliant
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.0
This document contains device specific information for
the following devices:
This family offers the advantages of all PIC18
microcontrollers
performance at an economical price. In addition to
these
family introduces design enhancements that make
these microcontrollers a logical choice for many
high-performance, power-sensitive applications.
1.1
1.1.1
All of the devices in the PIC18F6310/6410/8310/8410
family incorporate a range of features that can
significantly
operation. Key items include:
• Alternate Run Modes: By clocking the controller
• Multiple Idle Modes: The controller can also run
• On-the-Fly Mode Switching: The
• Lower Consumption in Key Modules: The
 2010 Microchip Technology Inc.
• PIC18F6310
• PIC18F6410
• PIC18F8310
• PIC18F8410
from the Timer1 source or the internal oscillator
block, power consumption during code execution
can be reduced by as much as 90%.
with its CPU core disabled, but the peripherals still
active. In these states, power consumption can be
reduced even further – to as little as 4% of normal
operation requirements.
power-managed modes are invoked by user code
during operation, allowing the user to incorporate
power-saving ideas into their application’s
software design.
power requirements for both Timer1 and the
Watchdog Timer have been reduced by up to
80%, with typical values of 1.1 A and 2.1 A,
respectively.
features,
DEVICE OVERVIEW
New Core Features
nanoWatt TECHNOLOGY
reduce
–
the
namely,
power
PIC18F6310/6410/8310/8410
• PIC18LF6310
• PIC18LF6410
• PIC18LF8310
• PIC18LF8410
consumption
high
computational
PIC18F6310/6410/8310/8410
during
1.1.2
All of the devices in the PIC18F6310/6410/8310/8410
family offer nine different oscillator options, allowing
users a wide range of choices in developing application
hardware. These include:
• Four Crystal modes, using crystals or ceramic
• Two External Clock modes, offering the option of
• Two External RC Oscillator modes, with the same
• An internal oscillator block which provides an
• A Phase Lock Loop (PLL) frequency multiplier,
Besides its availability as a clock source, the internal
oscillator block provides a stable reference source that
gives the family additional features for robust
operation:
• Fail-Safe Clock Monitor: This option constantly
• Two-Speed Start-up: This option allows the
resonators.
using two pins (oscillator input and a divide-by-4
clock output) or one pin (oscillator input, with the
second pin reassigned as general I/O).
pin options as the External Clock modes.
8 MHz clock (±2% accuracy) and an INTRC
source (approximately 31 kHz, stable over
temperature and V
six user-selectable clock frequencies between
125 kHz to 4 MHz for a total of eight clock
frequencies. This option frees the two oscillator
pins for use as additional general purpose I/O.
available to both the High-Speed Crystal and
Internal Oscillator modes, which allows clock
speeds of up to 40 MHz. Used with the internal
oscillator, the PLL gives users a complete
selection of clock speeds from 31 kHz to 32 MHz
– all without using an external crystal or clock
circuit.
monitors the main clock source against a
reference signal provided by the internal
oscillator. If a clock failure occurs, the controller is
switched to the internal oscillator block, allowing
for continued low-speed operation or a safe
application shutdown.
internal oscillator to serve as the clock source
from Power-on Reset or wake-up from Sleep
mode until the primary clock source is available.
MULTIPLE OSCILLATOR OPTIONS
AND FEATURES
DD
), as well as a range of
DS39635C-page 9