C8051F544-IM Silicon Laboratories Inc, C8051F544-IM Datasheet - Page 141

• Manufacturer Part Number: C8051F544-IM
• Description: IC 8051 MCU 8K FLASH 32-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F54xr

Specifications of C8051F544-IM

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 32-QFN
• Mfg Application Notes: LIN Bootloader AppNote
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: SMBus (2-Wire/I²C), LIN, SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 25
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.25 V
• Data Converters: A/D 25x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: C8051F5x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 25
• Operating Supply Voltage: 1.8 V to 5.25 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F540DK
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1672 - BOARD PROTOTYPE W/C8051F540336-1669 - KIT DEVELOPMENT FOR C8051F540
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1677-5

SFR Definition 17.5. CLKMUL: Clock Multiplier
SFR Address = 0x97; SFR Page = 0x0F;
Notes: The maximum system clock is 50 MHz, and so the Clock Multiplier output should be scaled accordingly. 
Name
Reset
Bit
4:2
1:0
Type
7
6
5
Bit
MULSEL[1:0] Clock Multiplier Input Select.
If Internal Oscillator x 2 or External Oscillator x 2 is selected using the MULSEL bits, MULDIV[2:0] is ignored.
MULDIV[2:0]
MULRDY
MULINIT
MULEN
MULEN
Name
R/W
7
0
MULINIT
Clock Multiplier Enable.
0: Clock Multiplier disabled.
1: Clock Multiplier enabled.
Clock Multiplier Initialize.
This bit is 0 when the Clock Multiplier is enabled. Once enabled, writing a 1 to this
bit will initialize the Clock Multiplier. The MULRDY bit reads 1 when the Clock Mul-
tiplier is stabilized.
Clock Multiplier Ready.
0: Clock Multiplier is not ready.
1: Clock Multiplier is ready (PLL is locked).
Clock Multiplier Output Scaling Factor.
000: Clock Multiplier Output scaled by a factor of 1.
001: Clock Multiplier Output scaled by a factor of 1.
010: Clock Multiplier Output scaled by a factor of 1.
011: Clock Multiplier Output scaled by a factor of 2/3*.
100: Clock Multiplier Output scaled by a factor of 2/4 (1/2).
101: Clock Multiplier Output scaled by a factor of 2/5*.
110: Clock Multiplier Output scaled by a factor of 2/6 (1/3).
111: Clock Multiplier Output scaled by a factor of 2/7*.
*Note: The Clock Multiplier output duty cycle is not 50% for these settings.
These bits select the clock supplied to the Clock Multiplier
MULSEL[1:0]
R/W
6
0
00
01
10
11
MULRDY
R
5
0
Selected Input Clock
External Oscillator
External Oscillator
Internal Oscillator
Internal Oscillator
Rev. 1.1
4
0
MULDIV[2:0]
Function
R/W
3
0
2
0
Clock Multiplier Output
for MULDIV[2:0] = 000b
External Oscillator x 2
External Oscillator x 4
Internal Oscillator x 2
Internal Oscillator x 4
C8051F54x
1
MULSEL[1:0]
0
R/W
0
0
141