AT91SAM7S32B-AU-999 Atmel, AT91SAM7S32B-AU-999 Datasheet - Page 16

• Manufacturer Part Number: AT91SAM7S32B-AU-999
• Description: IC MCU ARM7 32KB FLASH 48LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32B-AU-999

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, JTAG, SPI, USART
• Maximum Clock Frequency: 55 MHz
• Number Of Programmable I/os: 21
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7S-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7S-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

7. Processor and Architecture
7.1
7.2
7.3
16
ARM7TDMI Processor
Debug and Test Features
Memory Controller
AT91SAM7S Series Preliminary
• RISC processor based on ARMv4T Von Neumann architecture
• Two instruction sets
• Three-stage pipeline architecture
• Integrated EmbeddedICE
• Debug Unit
• IEEE1149.1 JTAG Boundary-scan on all digital pins
• Bus Arbiter
• Address decoder provides selection signals for
• Abort Status Registers
• Misalignment Detector
• Remap Command
• Embedded Flash Controller
– Runs at up to 55 MHz, providing 0.9 MIPS/MHz
– ARM
– Thumb
– Instruction Fetch (F)
– Instruction Decode (D)
– Execute (E)
– Two watchpoint units
– Test access port accessible through a JTAG protocol
– Debug communication channel
– Two-pin UART
– Debug communication channel interrupt handling
– Chip ID Register
– Handles requests from the ARM7TDMI and the Peripheral DMA Controller
– Three internal 1 Mbyte memory areas
– One 256 Mbyte embedded peripheral area
– Source, Type and all parameters of the access leading to an abort are saved
– Facilitates debug by detection of bad pointers
– Alignment checking of all data accesses
– Abort generation in case of misalignment
– Remaps the SRAM in place of the embedded non-volatile memory
– Allows handling of dynamic exception vectors
– Embedded Flash interface, up to three programmable wait states
®
high-performance 32-bit instruction set
®
high code density 16-bit instruction set
™
(embedded in-circuit emulator)
6175K–ATARM–30-Aug-10