PIC18F26J50-I/SP Microchip Technology, PIC18F26J50-I/SP Datasheet - Page 138

• Manufacturer Part Number: PIC18F26J50-I/SP
• Description: IC PIC MCU FLASH 64K 2V 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26J50-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART/I2C/SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F2XK20/4XK20
10.8
The output slew rate of each port is programmable to
select either the standard transition rate or a reduced
transition rate of 0.1 times the standard to minimize
EMI. The reduced transition time is the default slew
rate for all ports.
REGISTER 10-4:
DS41303D-page 136
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
U-0
—
2:
Port Slew Rate Control
These bits are not implemented on PIC18F2XK20 devices.
The slew rate of RA6 defaults to standard rate when the pin is used as CLKOUT.
Unimplemented: Read as ‘0’
SLRE: PORTE Slew Rate Control bit
1 = All outputs on PORTE slew at 0.1 times the standard rate
0 = All outputs on PORTE slew at the standard rate
SLRD: PORTD Slew Rate Control bit
1 = All outputs on PORTD slew at 0.1 times the standard rate
0 = All outputs on PORTD slew at the standard rate
SLRC: PORTC Slew Rate Control bit
1 = All outputs on PORTC slew at 0.1 times the standard rate
0 = All outputs on PORTC slew at the standard rate
SLRB: PORTB Slew Rate Control bit
1 = All outputs on PORTB slew at 0.1 times the standard rate
0 = All outputs on PORTB slew at the standard rate
SLRA: PORTA Slew Rate Control bit
1 = All outputs on PORTA slew at 0.1 times the standard rate
0 = All outputs on PORTA slew at the standard rate
U-0
—
SLRCON: SLEW RATE CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
U-0
—
SLRE
R/W-1
Preliminary
(1)
(1)
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
SLRD
R/W-1
(1)
(2)
R/W-1
SLRC
© 2008 Microchip Technology Inc.
x = Bit is unknown
R/W-1
SLRB
R/W-1
SLRA
bit 0