MC908QY2AMDTE Freescale Semiconductor, MC908QY2AMDTE Datasheet - Page 133

• Manufacturer Part Number: MC908QY2AMDTE
• Description: IC MCU 8BIT 1.5K FLASH 16TSSOP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908QY2AMDTE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 1.5KB (1.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 16-TSSOP
• Processor Series: HC08QY
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05AE, DEMO908QB8, DEMO908QC16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

TOIE — TIM Overflow Interrupt Enable Bit
TSTOP — TIM Stop Bit
TRST — TIM Reset Bit
Freescale Semiconductor
If another TIM overflow occurs before the clearing sequence is complete, then writing 0 to TOF has no
effect. Therefore, a TOF interrupt request cannot be lost due to inadvertent clearing of TOF. Writing a
1 to TOF has no effect.
This read/write bit enables TIM overflow interrupts when the TOF bit becomes set.
This read/write bit stops the counter. Counting resumes when TSTOP is cleared. Reset sets the
TSTOP bit, stopping the counter until software clears the TSTOP bit.
Setting this write-only bit resets the counter and the TIM prescaler. Setting TRST has no effect on any
other timer registers. Counting resumes from $0000. TRST is cleared automatically after the counter
is reset and always reads as 0.
These read/write bits select one of the seven prescaler outputs as the input to the counter as
Table 14-1
1 = Counter has reached modulo value
0 = Counter has not reached modulo value
1 = TIM overflow interrupts enabled
0 = TIM overflow interrupts disabled
1 = Counter stopped
0 = Counter active
1 = Prescaler and counter cleared
0 = No effect
shows.
Do not set the TSTOP bit before entering wait mode if the TIM is required
to exit wait mode. Also, when the TSTOP bit is set and the timer is
configured for input capture operation, input captures are inhibited until the
TSTOP bit is cleared.
Setting the TSTOP and TRST bits simultaneously stops the counter at a
value of $0000.PS[2:0] — Prescaler Select Bits
PS2
0
0
0
0
1
1
1
1
MC68HC908QYA/QTA Family Data Sheet, Rev. 3
PS1
0
0
1
1
0
0
1
1
Table 14-1. Prescaler Selection
PS0
0
1
0
1
0
1
0
1
NOTE
NOTE
Internal bus clock ÷ 16
Internal bus clock ÷ 32
Internal bus clock ÷ 64
Internal bus clock ÷ 1
Internal bus clock ÷ 2
Internal bus clock ÷ 4
Internal bus clock ÷ 8
TIM Clock Source
TCLK (if available)
Registers
133