ATMEGA88PV-10AU Atmel, ATMEGA88PV-10AU Datasheet - Page 82

• Manufacturer Part Number: ATMEGA88PV-10AU
• Description: MCU AVR 8K ISP FLSH 10MHZ 32TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA88PV-10AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-TQFP, 32-VQFP
• Processor Series: ATMEGA8x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, TWI, UART
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 32TQFP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 10 MHz
• Controller Family/series: AVR MEGA
• No. Of I/o's: 23
• Eeprom Memory Size: 512Byte
• Ram Memory Size: 1KB
• Cpu Speed: 10MHz
• Rohs Compliant: Yes
• For Use With: ATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATAVRISP2 - PROGRAMMER AVR IN SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8025L–AVR–7/10
(one)) to serve this function. The OC1A pin is also the output pin for the PWM mode timer
function.
PCINT1: Pin Change Interrupt source 1. The PB1 pin can serve as an external interrupt source.
• ICP1/CLKO/PCINT0 – Port B, Bit 0
ICP1, Input Capture Pin: The PB0 pin can act as an Input Capture Pin for Timer/Counter1.
CLKO, Divided System Clock: The divided system clock can be output on the PB0 pin. The
divided system clock will be output if the CKOUT Fuse is programmed, regardless of the
PORTB0 and DDB0 settings. It will also be output during reset.
PCINT0: Pin Change Interrupt source 0. The PB0 pin can serve as an external interrupt source.
Table 13-4
signals shown in
tute the MISO signal, while MOSI is divided into SPI MSTR OUTPUT and SPI SLAVE INPUT.
Table 13-4.
Notes:
Signal
Name
PUOE
PUOV
DDOE
DDOV
PVOE
PVOV
DIEOE
DIEOV
DI
AIO
1. INTRC means that one of the internal RC Oscillators are selected (by the CKSEL fuses),
EXTCK means that external clock is selected (by the CKSEL fuses)
and
PB7/XTAL2/
TOSC2/PCINT7
INTRC • EXTCK+
AS2
0
INTRC • EXTCK+
AS2
0
0
0
INTRC • EXTCK +
AS2 + PCINT7 •
PCIE0
(INTRC + EXTCK) •
AS2
PCINT7 INPUT
Oscillator Output
Overriding Signals for Alternate Functions in PB7..PB4
Table 13-5 on page 83
Figure 13-5 on page
(1)
PB6/XTAL1/
TOSC1/PCINT6
INTRC + AS2
0
INTRC + AS2
0
0
0
INTRC + AS2 +
PCINT6 • PCIE0
INTRC • AS2
PCINT6 INPUT
Oscillator/Clock
Input
78. SPI MSTR INPUT and SPI SLAVE OUTPUT consti-
relate the alternate functions of Port B to the overriding
(1)
ATmega48P/88P/168P
PB5/SCK/
PCINT5
SPE • MSTR
PORTB5 • PUD
SPE • MSTR
0
SPE • MSTR
SCK OUTPUT
PCINT5 • PCIE0
1
PCINT5 INPUT
SCK INPUT
–
PB4/MISO/
PCINT4
SPE • MSTR
PORTB4 • PUD
SPE • MSTR
0
SPE • MSTR
SPI SLAVE
OUTPUT
PCINT4 • PCIE0
1
PCINT4 INPUT
SPI MSTR INPUT
–
82