BLM18AG151SH1D Murata, BLM18AG151SH1D Datasheet - Page 20

• Manufacturer Part Number: BLM18AG151SH1D
• Description: EMI/RFI Suppressors & Ferrites 0603 150ohms Gen Use Tape
• Manufacturer: Murata
• Series: BLM Ar

Specifications of BLM18AG151SH1D

• Shielding: Unshielded
• Test Frequency: 100 MHz
• Product: Chip Ferrite Beads
• Impedance: 150 Ohms
• Tolerance: 25 %
• Maximum Dc Current: 200 mAmps
• Maximum Dc Resistance: 0.25 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 0603 (1608 metric)
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
!Note
3. Environment Performance (It should be soldered on the glass-epoxy substrate.)
2
No.
No.
5
6
1
2
3
4
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
Bending Strength
Vibration
Humidity
Heat Life
Cold Resistance
Temperature Cycling
Item
Item
Meet Table 2.
Table 2
Meet Table 3.
Table 3
Meet Table 4.
Table 4
Meet Table 5.
Table 5
Cap. Change
Cap. Change
Cap. Change
Capacitance
Appearance
Appearance
Appearance
Appearance
Rdc 1, 2
Rdc 1, 2
Rdc 1, 2
Rdc 1, 2
I.R.
I.R.
22 to 2200pF
22 to 2200pF
22 to 2200pF
22 to 2200pF
Specifications
Specifications
22000pF
22000pF
22000pF
22000pF
Meet rating table above.
Meet rating table above.
Meet rating table above.
within
within
within
No damage
No damage
No damage
No damage
12.5%
12.5%
7.5%
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
Specifications and Test Methods
It should be soldered on the glass-epoxy substrate (t = 1.0mm).
Deflection: 2mm
Keeping Time: 30s
It should be soldered on the glass-epoxy substrate.
Oscillation Frequency: 10 to 55 to 10Hz for 1 min.
Total Amplitude: 1.5mm
Testing Time: A period of 2 hrs. in each of 3 mutually
perpendicular directions. (Total 6 hrs.)
Initial values: About 220 to 22000pF, measured after heat
treatment [150 C (+0, -10 C), 1 hr.] and exposure to room
conditions for 48 4 hrs.
Temperature: 70 2 C
Humidity: 90 to 95%(RH)
Time: 1000 hrs. (+48 hrs., -0 hr.)
Then measured after exposure to room conditions for
following hours.
Temperature: 125 3 C
Test Voltage: Rated Voltage x 200%
Applying Current: 50mA max.
Time: 1000 hrs. (+48 hrs., -0 hr.)
Then measured after exposure to room conditions for
following hours.
Initial values: About 220 to 22000pF, measured after heat
treatment [150 C (+0, -10 C), 1 hour] and exposure to room
conditions for 48 4 hrs.
Temperature: -55
Time: 1000 hrs. (+48 hrs., -0 hr.)
Then measured after exposure to room conditions for
following hours.
1 Cycle
Total of 1000 cycles
Then measured after exposure to room conditions for
following hours.
Initial values: About 220 to 22000pF, measured after heat
treatment [150 C (+0, -10 C), 1 hr.] and exposure to room
conditions for 48 4 hrs.
22 to 100pF: 24 2 hrs.
220 to 22000pF: 48 4 hrs.
22 to100pF: 24 2 hrs.
220 to 22000pF: 48 4 hrs.
22 to 100pF: 24 2 hrs.
220 to 22000pF: 48 4 hrs.
1 step: -55
2 step: Room Temperature / within 5 minutes.
3 step: -125
4 step: Room Temperature / within 5 minutes.
22 to 100pF: 24 2 hrs.
220 to 22000pF: 48 4 hrs.
0
3
3
0
C / 30 3 minutes
C / 30 3 minutes
2 C
Test Methods
Test Methods
45
R230 F
Pressure jig
45
Product
Deflection
(in mm)
C50E.pdf 05.1.28
19
2