HP75BNC12X Switchcraft Inc., HP75BNC12X Datasheet - Page 293

• Manufacturer Part Number: HP75BNC12X
• Description: CONN BNC PLUG TRUE 75 OHM CRIMP
• Manufacturer: Switchcraft Inc.
• Series: BNCr
• Type: BNCr

Specifications of HP75BNC12X

• Impedance: 75 Ohm
• Rohs Information: Switchcraft RoHS Info.
• Connector Style: BNC
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Gender: M
• Body Style: Straight
• Terminate To: Coaxial Cable
• Mounting Style: Cable
• Termination: Crimp
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Body Material: Copper Alloy
• Product Length (mm): 25mm
• Product: Connector
• Rf Series: BNC
• Polarity: Normal
• Shell Plating: Nickel
• Termination Style: Crimp
• Cable Type: Belden 1417B, 1855A, 1865A, Gepco VDM230, VDM250, RGB230/250 Series, Comm/Scope 7537, 7538
• Housing Material: Copper Alloy
• Maximum Frequency: 3 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Frequency-max: -
• Color: -
• Cable Group: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

288
w w w . s w i t c h c r a f t . c o m
SWITCHES
MINIATURE SLIDE SWITCHES – SERIES 56200 AND C56200
MINIATURE SLIDE SWITCHES
MINIATURE SLIDE SWITCHES – SERIES 56200 AND C56200
SERIES 56200, C56200 - 2 POSITION
“Tini-Slide” slide switches have Exclusive SNAP SLIDE lifting
and wiping action. This unique, positive action combines the
best features of “snap” and “slide” movements into the design
of a superior switch. Pitting, burning and contamination are
minimized. Contacts lift through an air gap, drop on stationary
contacts, and slide, wiping themselves clean. Subminiature
size is ideal where useable space is at a premium.
SPECIFICATIONS
Contact Ratings: 0.5A, 125V AC or DC, non-inductive.
Minimum life at rated load 6000 cycles. Resistance after
6000 cycles at rated load is 50 milliohms maximum.
Terminals: PC Type - silver-plated. Each terminal has
standoff shoulder for stable mounting and space for board
clearance.
Mounting: Flange, (56206L1 and 56206L2) - .1" (2.54 mm)
holes for screw or mounting rivet. PC - Direct mounting to PC
boards up to .093" (2.36 mm) thick.
Knob: Molded thermoplastic (UL 94V-1).
Terminal Board: Molded thermoplastic (UL 94V-0).
Terminals: Copper alloy, silver-plated.
Contact Sliders: Copper alloy.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
56206L1
56206L2
DIMENSIONS ARE FOR REFERENCE ONLY
C56206L2
56206L1
SPECIAL ORDER
PART NUMBERS
56206L1
56206L2
C56206L1
C56206L2
SPECIAL ORDER FEATURES
1. .2" (5.08 mm) high knobs are standard; other heights
2. Red and white knobs available.
3. Mounting flanges with .1" (2.54 mm) diameter holes on
4. UL stamped on special order.
Number
Part
available on special order. See page 283.
C56206L1 or C56206L2. Flange holes tapped #4-40 on
56206L1 or 56206L2 (where production quantities warrant).
(mm)
Note: Contact your Switchcraft Representative for price and delivery
Inch
Dimension "B"
.573 (14.55)
.352 (8.94)
Inch (mm)
-
-
PHONE: 773 792 - 2700
RECOMMENDED PC BOARD
LAYOUT (Component Side)
® Registered trademark of Switchcraft, Inc.
Description
DPDT, Locking
DPDT, Locking
DPDT, Locking
DPDT, Locking
C56206L1 & 2
C56206L2
Schematic
2-III
2-III
2-III
2-III