HP75BNC12X Switchcraft Inc., HP75BNC12X Datasheet - Page 301

• Manufacturer Part Number: HP75BNC12X
• Description: CONN BNC PLUG TRUE 75 OHM CRIMP
• Manufacturer: Switchcraft Inc.
• Series: BNCr
• Type: BNCr

Specifications of HP75BNC12X

• Impedance: 75 Ohm
• Rohs Information: Switchcraft RoHS Info.
• Connector Style: BNC
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Gender: M
• Body Style: Straight
• Terminate To: Coaxial Cable
• Mounting Style: Cable
• Termination: Crimp
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Body Material: Copper Alloy
• Product Length (mm): 25mm
• Product: Connector
• Rf Series: BNC
• Polarity: Normal
• Shell Plating: Nickel
• Termination Style: Crimp
• Cable Type: Belden 1417B, 1855A, 1865A, Gepco VDM230, VDM250, RGB230/250 Series, Comm/Scope 7537, 7538
• Housing Material: Copper Alloy
• Maximum Frequency: 3 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Frequency-max: -
• Color: -
• Cable Group: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

296
w w w . s w i t c h c r a f t . c o m
SWITCHES
LEVER-LITE
LEVER-LITE
LEVER SWITCHES (continued)
LEVER-LITE
LEVER SWITCHES
SPECIFYING LEVER-LITE
1. Basic Switch - Refer to Part Number table for ordering
2. Illumination - Supplied with standard color filters installed.
3. Lamps - Lamps are not supplied with switches.
SPECIFICATIONS
Mounting/Retaining Clips and Covers: Steel, plated.
Contact Ratings: Welded cross bar palladium contacts
rated at 1A, 200W maximum AC non-inductive load are
standard. Other contacts available. See “SPECIAL
ORDER FEATURES” on page 295.
PART NUMBERS
TWO POSITION
switches. For special switches, such as talk-listen
(intercom) function, special circuit forms, or
non-illuminated switches, contact factory for price
and delivery.
Switchcraft will install other combinations at nominal
extra cost.
LEVER-LITE® SERIES 84000
Non-Locking
◊84206
◊84212
®
®
®
Part Numbers
ILLUMINATED LEVER SWITCHES – SERIES 84000
ILLUMINATED LEVER SWITCHES – SERIES 84000
III SERIES 84000 - ILLUMINATED
®
Locking
◊84212L
III SWITCHES
84206L
DIMENSIONS ARE FOR REFERENCE ONLY
Switching
2-C
4-C
Springs: Copper alloy, plated.
Lamp Terminals: Copper alloy, plated.
Lamp Socket: Zinc, plated.
Terminals: Copper alloy, plated, straight solder lugs.
Housing, Escutcheon, Knob, Actuator and
Switching Stacks Insulation: Molded plastic.
Temperature Range: -22°F to 158°F (-30°C to +70°C).
Dielectric Strength: 1 kV DC.
Leakage Resistance: 1,000 MΩ or greater.
K-131 COLOR FILTER KIT
Kit is available for changing or replacing color filters to meet
illumination requirements. Each kit contains 3 filters of each
color: Amber, Blue, Green, Red, White and Yellow.
SWITCHCRAFT PART NUMBER K-131
REPLACEMENT LEVERS
Number G6083 (for locking lever)
Number G6084 (for non-locking lever)
◊ Special order only; contact Switchcraft.
THREE POSITION
◊84306
◊84312
◊84324
(mm)
Note: Contact your Switchcraft Representative for price and delivery
Inch
Part Numbers
PHONE: 773 792 - 2700
84306L
84312L
84324L
® Registered trademark of Switchcraft, Inc.
x 1.375" (34.92mm)
PANEL OPENING
.750" (19.05mm)
Position 1
1-C
2-C
4-C
Position 2
1-C
2-C
4-C