HP75BNC12X Switchcraft Inc., HP75BNC12X Datasheet - Page 66

• Manufacturer Part Number: HP75BNC12X
• Description: CONN BNC PLUG TRUE 75 OHM CRIMP
• Manufacturer: Switchcraft Inc.
• Series: BNCr
• Type: BNCr

Specifications of HP75BNC12X

• Impedance: 75 Ohm
• Rohs Information: Switchcraft RoHS Info.
• Connector Style: BNC
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Gender: M
• Body Style: Straight
• Terminate To: Coaxial Cable
• Mounting Style: Cable
• Termination: Crimp
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Body Material: Copper Alloy
• Product Length (mm): 25mm
• Product: Connector
• Rf Series: BNC
• Polarity: Normal
• Shell Plating: Nickel
• Termination Style: Crimp
• Cable Type: Belden 1417B, 1855A, 1865A, Gepco VDM230, VDM250, RGB230/250 Series, Comm/Scope 7537, 7538
• Housing Material: Copper Alloy
• Maximum Frequency: 3 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Frequency-max: -
• Color: -
• Cable Group: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SLIM-LINE CONNECTORS (continued)
INSERTS
Inserts are molded of high-strength plastic, and are
completely interchangeable between plug and receptacle
housings at any time. Inserts are keyed to housings, and male
and female inserts are polarized to prevent mismating.
PIN/CONTACT CONFIGURATIONS:
Insert is installed from front, and the captive latch spring locks
insert to housing. To remove insert from receptacle, depress
latch spring and apply pressure to rear of insert (DO NOT
APPLY PRESSURE TO TERMINALS). On cord plugs, depress
latch spring and press in on strain relief to free the insert.
GROUNDING/SHIELDING
Housings shield internal connections and provide ground
(common) connections without using a pin/contact. On cord
plugs, ground lead (or shield) is connected to cable clamp. For
receptacles Cable Clamp, SL04 is ordered separately as a
special and installed. If desired, ground/shield connection may
then be made to clamp. When mated, a continuous, shielded,
low resistance path is made through the connector.
SLIM-LINE CONNECTOR PART NUMBERING SYSTEM
PIN AND CONTACT ARRANGEMENTS
SCHEMATIC CIRCUITS
◊Add an “S” to end of part number for shunts. Special order only.
SL
SERIES
Pins
2
3
4
5
SLIM-LINE
Part Number
Contacts
◊SL01
◊SL02
◊SL03
◊SL04
◊SL05
2
3
4
5
10 RECEPTACLE, FLANGE MOUNT
17 RECEPTACLE, REAR MOUNT
18 RECEPTACLE, FRONT MOUNT
40 CORD PLUG WITH COUPLING RING
41 CORD PLUG WITHOUT COUPLING RING
Strain Relief Spring
2 (N.C. Shunt on each contact)
3 (N.C. Shunts on contacts 1 and 3)
4 (N.C. Shunts on contacts 1 and 4)
Cable Clamp
Lockwasher
Flat Washer
Hex Nut
HOUSING TYPE
Item
Contacts (Shunts)
NONE
_
DIMENSIONS ARE FOR REFERENCE ONLY
SPECIFICATIONS
MATERIALS
Receptacle Housings: Die-cast zinc, nickel-plated.
Cord Plug Housings: Copper alloy, nickel-plated.
Inserts: Glass-reinforced thermoplastic. UL 94 V-0.
Female Contacts: Copper alloy, silver-plated, solder lug type.
Pins: Copper alloy, silver-plated, solder cup type.
Cable Clamp, Strain Relief, and Mounting Hardware:
ELECTRICAL
Current Rating: 5 Amps carry only.
MOUNTING
Cord Plugs: Plugs accept cables up to .281" (7.14 mm) diameter.
Receptacles: Flange mount type mounts in panels or chassis
up to .188" (4.78 mm) thick. .125" (3.18 mm) diameter holes
accept #4 machine screws or .125" (3.18 mm) diameter rivets.
Rear and front of panel types mount in “D”-shaped hole in panels
or chassis up to .219" (5.56 mm) thick. Hex nut (SL01), lockwasher
(SL02), and flat washer (SL03) are supplied for mounting.
CABLE CLAMP AND STRAIN RELIEF
Cord Plugs: Plugs are supplied with rugged cable clamps and
strain relief springs. Cable clamp serves two valuable functions: to
firmly hold cable to prevent pulling or twisting strains on soldered
terminations, and as a connecting point for ground (common) or
shield when grounding/shielding through the connector is
required.
Receptacles: Receptacles are not supplied standard with
cable clamp for strain relief. If grounding/shielding feature is
desired, separate Cable Clamp, SL04, is installed on receptacle
insert.
MOUNTING HARDWARE
(Supplied with Series SL17 and SL18 receptacles)
Number of
Contacts
Steel, plated. Latch: Steel, plated.
2
3
4
5
(mm)
Inch
M MALE
F FEMALE
Gender
CONNECTORS & RECEPTACLES
S
SLIM-LINE CONNECTORS
WITH SHUNTS
SLIM-LINE CONNECTORS
Options
61