PIC24FJ256GB106-I/MR Microchip Technology, PIC24FJ256GB106-I/MR Datasheet - Page 213

• Manufacturer Part Number: PIC24FJ256GB106-I/MR
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, QFN-64
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GB106-I/MR

• Controller Family/series: PIC24
• No. Of I/o's: 51
• Ram Memory Size: 16KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Core Size: 16 Bit
• Program Memory Size: 256KB
• Peripherals: ADC, Comparator, PWM, RTC, Timer
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART, USB OTG
• Number Of I /o: 51
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 17-8:
© 2008 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R-x, HSC
JSTATE
U-0
—
Unimplemented: Read as ‘0’
JSTATE: Live Differential Receiver J State Flag bit
1 = J state (differential ‘0’ in low speed, differential ‘1’ in full speed) detected on the USB
0 = No J state detected
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero active on the USB bus
0 = No single-ended zero detected
TOKBUSY: Token Busy Status bit
1 = Token being executed by the USB module in On-The-Go state
0 = No token being executed
RESET: Module Reset bit
1 = USB Reset has been generated; for software Reset, application must set this bit for 10 ms, then
0 = USB Reset terminated
HOSTEN: Host Mode Enable bit
1 = USB host capability enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability disabled
RESUME: Resume Signaling Enable bit
1 = Resume signaling activated; software must set bit for 10 ms and then clear to enable remote wake-up
0 = Resume signaling disabled
PPBRST: Ping-Pong Buffers Reset bit
1 = Reset all Ping-Pong Buffer Pointers to the EVEN BD banks
0 = Ping-Pong Buffer Pointers not reset
SOFEN: Start-Of-Frame Enable bit
1 = Start-Of-Frame token sent every one 1 millisecond
0 = Start-Of-Frame token disabled
R-x, HSC
SE0
clear it
U-0
—
U1CON: USB CONTROL REGISTER (HOST MODE ONLY)
W = Writable bit
‘1’ = Bit is set
TOKBUSY
R/W-0
U-0
—
PIC24FJ256GB110 FAMILY
RESET
R/W-0
U-0
—
Preliminary
U = Unimplemented bit, read as ‘0’
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
HOSTEN
R/W-0
U-0
—
RESUME
R/W-0
U-0
—
x = Bit is unknown
PPBRST
R/W-0
U-0
—
DS39897B-page 211
SOFEN
R/W-0
U-0
—
bit 8
bit 0