60118 SQUARE D, 60118 Datasheet - Page 39

• Manufacturer Part Number: 60118
• Description: MINIATURE CIRCUIT BREAKER 120V 1A
• Manufacturer: SQUARE D
• Series: Multi 9r

Specifications of 60118

• Actuator Style: Toggle
• No. Of Poles: 1
• Current Rating: 1A
• Voltage Rating Vac: 240V
• Mounting Type: DIN Rail
• Rohs Compliant: Yes

© 2002–2010 Schneider Electric
All Rights Reserved
2P C120 Vigi
Module
IEC Rated C120 Vigi
The C120 Vigi residual current detector can be added to the C120 circuit breaker to provide a high
level of protection against earth leakage faults. The Vigi module clips onto the right-hand side of a
C120 protective device and is mechanically linked to the C120 circuit breaker, which it trips when the
Vigi detects residual current.
The C120 circuit breaker and Vigi module combination is reset in a single operation by resetting the
circuit breaker
The Vigi module combines a current sensing toroid and residual current relay in one case and
operates without an auxiliary power supply source. It may be ordered with a variety of non-adjustable
sensitivities (30 to 1,000 mA). A version with time delay (selective) provides additional time
discrimination with downstream instantaneous residual current devices.
Vigi modules combine with the C120 2-, 3- and 4-pole circuit breakers to provide:
•
•
•
The C120 circuit breaker and Vigi module combination is protected against nuisance tripping due to
transient overvoltages such as lightning, switching on the network, etc.
Table 37:
Standards
Complies with IEC 1009 Standard
Catalog Numbers
Table 38:
1
Current Rating
Guarantees Tripping for Sinusoidal
AC Residual Currents
Total Vertical Discrimination with
the I
“Selective” Sensitivities if it is
Installed:
Connections
Voltage
Mechanical Indication
Instantaneous or Selective Tripping Fixed Sensitivities for All Ratings
See Table 29 on page 32 for weights and interrupting ratings
Rating
125 A
s
Protection of people against indirect contact (per IEC Standards)
Additional protection of people against direct contact (30 mA)
Protection of electrical installations against insulation faults
Δn
Selective = has non-adjustable time delay to allow selective coordination
300 mA to 1 A
220–415 Vac
Voltage
Specifications for IEC Rated C120 Vigi Residual Current Circuit Breakers
Catalog Numbers for IEC C120 Vigi Si (Noise Immune) Module—AC Class
s
Sensitivity (mA)
TM
125 A
Either Suddenly Applied or Slowly Increasing
Upstream From an instantaneous Residual
Current Device
Downstream from an Index II, Time-Delayed
Residual Current Device
16–2 AWG (1–35 mm
16–1 AWG (1–50 mm
220–415 Vac
Red Indicator
300
1000
300
500
30
Residual Current Circuit Breakers
s
1
Section 4—Ground-Fault Protection Devices
2
2
) Stranded Wire
) Solid Wire
18591
18592
18556
18593
18557
2P
Where in Both Cases the I
Device ≤ I
31 lb-in (3.5 N•m)
31 lb-in (3.5 N•m)
+10%, -20%, 50/60 Hz
On Front Face of the Vigi Module
Multi 9™ System Catalog
18594
18595
18558
18596
18559
3P
Δn/2
of the Upstream Device
Δn
18597
18598
18560
18599
18561
4P
of the Downstream
07/2010
39