60118 SQUARE D, 60118 Datasheet - Page 49

• Manufacturer Part Number: 60118
• Description: MINIATURE CIRCUIT BREAKER 120V 1A
• Manufacturer: SQUARE D
• Series: Multi 9r

Specifications of 60118

• Actuator Style: Toggle
• No. Of Poles: 1
• Current Rating: 1A
• Voltage Rating Vac: 240V
• Mounting Type: DIN Rail
• Rohs Compliant: Yes

© 2002–2010 Schneider Electric
All Rights Reserved
Comb Bus Bars
UL Recognized C60 Comb Bus Bars
A Comb Bus Bar can be used to provide common service to a number of Multi 9 supplementary
protectors and accessories. This eliminates the hassle of providing discrete wiring to a number of
protective devices operating from one power source. It is available in 0.71 in. (18 mm) pole spacings
for the C60 series. It meets the UL 1077 requirements.
These are available in 1-, 2-, or 3-phase (conductor) models, and can be purchased in 12-pole (12P)
lengths.
Field wiring may be applied directly to the comb bus bar by inserting both the conductor and the tooth
of the comb into the same box lug connector of the C60N supplementary protector
Figure 17:
Refer also to the tooth cap accessories for the comb bus bar.
•
•
•
•
•
•
•
•
Table 46:
Tooth Caps for UL Recognized Comb Bus Bars
Tooth Caps for UL Recognized Comb Bus Bars may be slipped onto the unused teeth of the Comb
Bus Bar. They come in strips of five with 1-pole spacing, but can be snapped apart to be used
individually.
Table 1: Tooth Caps for UL Recognized Comb Bus Bars
IEC Rated C60 Comb Bus Bars
These are available in 1-, 2-, 3- or 4-phase (conductor) models, and can be purchased in 12-pole, 24-
pole, or 54-pole (1 meter) lengths.
Description
12P Comb Bus Bar
Description
Tooth Caps for 0.71 in. (18 mm) Comb Bus Bar (20 Pieces)
Rated insulation voltage: 480Y/277 Vac
Rated current: 63 A service single-feed
Available in 1-, 2-, or 3-phases (conductors)
Spacing of outgoing poles: 0.71 in. (18 mm)
Lengths: Fixed length of 12 poles
Height: 0.80 inches (20 mm) above circuit breaker
Connection: Comb tooth and main feed wire (10 AWG to 3 AWG) connect to box lug of UL 1077
C60N supplementary protector
UL Recognized for use with UL 1077 devices only; not CSA Recognized
UL Recognized C60 3-phase Comb Bus Bar
Catalog Numbers for UL Recognized C60 Comb Bus Bars
Length
8.5 in. (216 mm)
Type
1Ø
2Ø
3Ø
Cat. No.
60488
Cat. No.
MG10285
MG10286
MG10287
Multi 9™ System Catalog
Section 5—Accessories
07/2010
49